Advertisement
Quick Links
Operation and Service Instructions
Micro-Abrasive Blasting Workstations
Issue Date: July 2016
This manual covers all variations of the Comco WS2200 and WS6000
series WorkStations (WS2200-1, WS2280-2, WS6000-2, etc.)
Comco Inc.
2151 N. Lincoln Street
Burbank, California 91504
USA
Phone: 818-841-5500
FAX: 818-955-8365
www.comcoinc.com
E-mail:
tech@comcoinc.com
Book P/N WS2019
File:WS Manual.doc
Advertisement
Related Manuals for Comco WS2200 Series
Summary of Contents for Comco WS2200 Series
- Page 1 Operation and Service Instructions Micro-Abrasive Blasting Workstations Issue Date: July 2016 This manual covers all variations of the Comco WS2200 and WS6000 series WorkStations (WS2200-1, WS2280-2, WS6000-2, etc.) Comco Inc. 2151 N. Lincoln Street Burbank, California 91504 Phone: 818-841-5500 FAX: 818-955-8365 www.comcoinc.com...
-
Page 2: Operation And Service
The Comco WS2200 and WS6000 WorkStations are designed to work as part of a micro- abrasive blasting system consisting of the following: 1. -
Page 3: Safety Precautions
CAUTION: Failure to secure the free end of the vent hose may allow it to fall out of the workstation and potentially whip around if left unsecured. Always secure the free end of the hose. Comco Inc. Page 3 Issue Date: July 2016... - Page 4 1. Unplug unit Switch failed 2. Remove back panel 3. Using ohmmeter, test for continuity across switch terminals with the switch set to ON. Service dust collector Dust builds up inside Comco Inc. Page 4 Issue Date: July 2016...
- Page 5 Comco Workstations – Wiring Diagrams WS2200 Series Classic WorkStation – 115 or 230V WS6000 Series ClearView WorkStation – 115 or 230V Comco Inc. Page 5 Issue Date: July 2016...
- Page 6 ST5640-3 Workstations with 5/8" dia. holes in panels use Grommet P/N ST5311 Older workstations (S/N below 4460) use 4" Iris P/N WS2028-1 Standard replacement lamps are available at most hardware stores. Comco Part No. ST7164 ST7164-3 ST7164-4 Lamp Type F15T8...
Need help?
Do you have a question about the WS2200 Series and is the answer not in the manual?
Questions and answers