Summary of Contents for GoFind GoFindR
-
Page 1: Quick Start Guide
Welcome to the GoFindR Family! Quick Start Guide GoFindR Pet Tracker GoFindR is a registered trademark of GoFind, Inc. 3103 Stonehenge Dr Richardson, TX 75082 Email: info@gofindinc.com www.gofindinc.com... -
Page 2: What's In The Box
WHAT’S IN THE BOX... - Page 3 Fits into wall plug & charging base to charge your unit. Charging Is amber during charging, green when GoFindR is fully charged. Turns red when charging is required. Flashes red when device powers down. Is off when disconnected from charger base.
-
Page 4: First Things First
FIRST THINGS FIRST A lithium polymer battery powers your GoFindR®. The unit comes partially charged. Charge the battery for at least 1 hour before initial use. Note: Detailed instructions with photos of the App screen on the website at: www.gofindinc/support STEP 1: Charge your GoFindR®... - Page 5 3. Plug the small end of the supplied USB charging cable into the charging base. 4. The charging indicator on the GoFindR® tracker will glow amber indicating that charging is taking place. 5. When fully charged, the charging indicator will glow green.
- Page 6 IMEI number found on the bottom of the GoFindR charging base as shown on the diagram, letter J. 3. Give your GoFindR a name, usually the name of your pet. Then click the “Send” button. 4. Enter a user name, a password & an email address (user names can be the same &...
- Page 7 You will need to configure some information before you receive valid data on the App. 6. Click on “Settings” & select your GoFindR by name on the GoFindR drop down menu. 7. Click on “Telephones”. Enter all cell phone #’s that should receive an SMS text alert from your tracker.
- Page 8 100 free SMS messages per month and each phone number that receives a message counts as one. For more information on SMS messages and limitations, see: www.gofindr.com/support For a full copy of the user manual & GoFindR App Screen Shots go to: www.gofindinc.com/support...
- Page 9 GoFindR Startup Guide Addendum This is an addendum to the GoFindR Quick Start Guide 1. After the device is fully charged and placed in a spot with clear view of the sky, push the power button. The Green Cellular/GPS LED will light up. 2. After about 45 seconds, The Cellular/GPS LED and the Power Button will go through a series of flashes as the GoFindR tracker downloads some initial data from the GPS satellites. 3. This process can take anywhere from 4 minutes to 15 minutes. Please do not power off the GoFindR tracker while the LEDs are flashing. 4. After the data has been downloaded from the satellites, the GoFindR tracker will reboot, and after about 30 seconds, all LEDs will go out. At this time the GoFindR tracker is fully operational. 5. Data will begin showing up in the smartphone app within 90 seconds of all LED’s being extinguished. 6. There is no IMEI label on the GoFindR tracker itself. The label is attached to the box. 7. If you have issues, please see our Support section at www.gofindinc.com/support . You may also send us an email at info@gofindinc.com, or call us at (602) 315-1043.
Need help?
Do you have a question about the GoFindR and is the answer not in the manual?
Questions and answers