1. Manuals
  2. Brands
  3. GE Lighting Manuals
  4. Light Fixture
  5. Albeo ABR1 Series
  6. Installation manual

GE Lighting Albeo ABR1 Series Installation Manual

Led luminaire
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

GE
Lighting
Albeo
TM
Heavy Industrial High Bay Lighting
(ABR1-Series)
Features
• UL 1598 Suitable for Wet Locations
• IP66 Rated Ingress Protection

BEFORE YOU BEGIN

Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL or IEC approved wire for input/output connections.
Minimum size 18 AWG.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005 (A) / NMB-005 (A)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Save These Instructions
Use only in the manner intended by the
manufacturer. If you have any questions,
contact the manufacturer.
imagination at work
LED Luminaire
WARNING/AVERTISSEMENT
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l'alimentation avant d'inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d'alimentation électrique.
RISQUES D'INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N'utilisez que des fils approuvés par UL ou IEC pour les entrées/sorties de
connexion. Taille minimum 18 AWG.
Prepare Electrical Wiring
Electrical Requirements
The LED driver must be supplied with
120-277 VAC or 347/480 VAC, 50/60 Hz per product
label and connected to an individual properly
grounded branch circuit, protected by a 15 or 20
ampere circuit breaker.
Grounding Instructions
The grounding and bonding of the overall system
shall be done in accordance with National Electric
Code (NEC) Article 600 and local codes.

Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Albeo ABR1 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GE Lighting Albeo ABR1 Series

Summary of Contents for GE Lighting Albeo ABR1 Series

  • Page 1: Installation Guide

    Installation Guide Lighting Albeo LED Luminaire Heavy Industrial High Bay Lighting (ABR1-Series) Features • UL 1598 Suitable for Wet Locations • IP66 Rated Ingress Protection BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF ELECTRIC SHOCK RISQUES DE DÉCHARGES ÉLECTRIQUES •...

  • Page 2: Unit Installation

    Unit Installation Provide at least 12” of clearance from the top of the fixture to any ceiling or surface above. Carefully unpack unit and Choose a mounting method: chain or cable, Wire colors: properly inspect for defects rod mount, or pendant mount. before installing.

  • Page 3: Pendant Mounting

    Pendant Mounting Attach pendant mount box to ¾” NPT conduit. Lift fixture up and hang on pendant mount box Determine rotation of fixture and lock orientation using hinge piece. in place with provided set screw. Tighten screw AC power cord Feed the AC power cord through the conduit and Swing fixture closed and secure with the slide clip.
  • Page 4 Captive screws Captive screws Note Note Single Fixture Dual Fixture Secure pendant mount box to fixture by fully tightening the captive screws on the sides of the pendant mount box to the fixture. NOTE: Safety chains can be used in mounting slots at end of fixture. Rotatable Bracket Mounting 12”...

  • Page 5: Troubleshooting

    GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting is a business of the General Electric Company. © 2017 GE.

Table of Contents