Page 1
Instruction Manual Cordless drill/driver 10.8 V Art. 32107 Li-Ion 10.8 V 1.5 h 2000 mAh 1 min. 0-400/ 1/4" 0-1400 1000 WARNING: DO NOT attempt to operate the tool until you have read and understood all instructions and safety rules contained in this manual.
Page 4
c) Keep children and other persons away while operating a power tool. Distractions can cause you to lose control. tightening and outlets will reduce the risk of electric shock. minors Disordered or dark areas can lead to accidents. environments with ammable liquids, gases or dust.
Page 5
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or placing power tools. Such preventive safety measures reduce the risk of starting the power tool unintentionally. d) Store unused power tools out of reach of children and do not allow persons not familiar with the power tool or these instructions to operate the power tool.
• Keep your workplace clean. Mixing of d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If materials is particularly dangerous. Light contact accidentally occurs, ush with water. If metal dusts easily can burn or explode. liquid contacts eyes, additionally seek medical •...
Page 8
2. Check that your mains voltage is the same as last step ,,Drill". In this setting the slip clutch is marked on the rating plate of the battery inactive. The maximum torque is available in drilling mode. charger. Plug the mains plug of the charger (8) into the mains socket outlet.
8.8 Changing the tool (B6) To use them you have to remove the Important! Set the rotation selectorswitch (2) to quick-change drill chuck (7) by pressing the rear its centre position whenever you carry out any drill chuck sleveve (b) to the drill chuck. work (for example changing the tool, mainte- nance work, etc.) on the cordless screwdriver.
• Clean the equipment regularly with a moist Important! cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the The vibration value changes according to the area plastic parts of the equipment. Ensure that no of application of the electric tool and may exceed water can seep into the device.
DECLARATION OF CONFORMITY 32107 Model: Cordless drill/driver 10.8 V KRAFTWERK Sàrl, 25 rue due Stade, F-67870 Bischoffsheim Declares under sole responsibility that the product to which this declaration relates is in conformity with the following standard(s) or other normative document(s):...
Page 12
KRAFTWERK Europe AG KRAFTWERK Sàrl. Mettlenbachstrasse 23 25, rue du Stade CH-8617 Mönchaltorf F – 67870 Bischoffsheim Switzerland France Tel. +41-44 949 40 50 Tel. +33-388 48 64 50 www.kraftwerktools.com...