OPERATION MANUAL RSD Refractometer INTRODUCTION Thank you for choosing our refractometer. This is an easy-to-use device, requiring little to no training. Please read the manual before using to ensure optimal measurement. The refractometer is designed for fast and accurate determination of fluid concentrations. The instrument will automatically compensate for temperature fluctuation and can be used for years of trouble-free service when properly and regularly maintained.
KEYS (BUTTONS) i) Turn on meter; or ii) Turn off meter after pressing for 3 seconds. i) Zero calibration; or ii) Press for 2 seconds to toggle between ℃ and ℉. i) Press the button to read after drop samples; or ii) Press for 2 seconds to toggle between measured items.
Page 3
solutions will be accurate with respect to sample's temperature. The refractometer is temperature compensated for aqueous (water-based) sucrose solutions and can automatically compensate for temperature differences within the range of 5℃ ~40℃ (41℉ -104℉). The temperature of the sample, however, has little bearing on the accuracy of the reading.
MEASUREMENT Make sure the prism surface is clean and dry Place a few drops of the sample on the prism 3. Press , “---” will be shown on the screen. Test result(s) will be shown on the screen (F 3.1) The result(s) will be stored in the device for up to 60 seconds.
STATUS 1. Press to turn on the device 2. Press to turn off the device, LCD will show the process 3. To be energy efficient, the device enter into sleep mode after standing by for more than 60 seconds Press to wake up the device F 6.1 4.
No liquid on the prism or not sufficient amount (F 7.4) F 7.4 Temperature error Temperature exceed range (F 7.5) Action: Check temperatures of sample liquid, the device and the ambience. F 7.5 Temperature under range (F 7.6) ...
MAINTENANCE WARNING: Fail to follow these precautions will void the warranty and may cause instrument damage or inaccurate readings. Please keep the measuring surface clean. It is extremely important to thoroughly clean the measuring surface after each use with a wet, soft, clean cloth or paper or towel, dampened with a mild liquid dish soap and water.
Need help?
Do you have a question about the RSD200 and is the answer not in the manual?
Questions and answers