Summary of Contents for noble pro Elite E8.0
- Page 1 USER’S MANUAL Information Model No: NPE78843E8.0 The latest user’s manual is available Serial No: ____________ online at noble-pro.com/support...
-
Page 2: Table Of Contents
TABLE OF CONTENTS ABOUT THE PRODUCT ....................... 5 PACKAGE CONTENT ........................6 ASSEMBLY ........................... 7 HEART RATE MONITOR CHEST STRAP ................... 11 HOW TO USE THE TREADMILL ....................12 HOW TO FOLD AND MOVE THE TREADMILL ................15 MAINTENANCE AND TROUBLESHOOTING ................16 TROUBLE SHOOTING........................ - Page 3 WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all IMPORTANT precautions and instructions in this manual and all warnings on your treadmill before using the treadmill. Noble Pro Ltd assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
- Page 4 25. When folding or moving the treadmill, 29. DANGER: Always unplug the power cord make sure that the storage latch is holding the immediately after use, before cleaning the frame securely in the storage position treadmill, and before performing the 26.
-
Page 5: About The Product
ABOUT THE PRODUCT Thank you for selecting the revolutionary Noble Pro ® E8.0 treadmill. The Noble Pro ® E8.0 treadmill offers an impressive selection of features designed to make your workouts at home more effective and enjoyable. When not exercising, the treadmill can be folded up which then requires less than half the floor space of other treadmills. -
Page 6: Package Content
PACKAGE CONTENT Base frame Console post x 2 Console frame Console Base posts 3.5 mm male-male jack Safety key Assembly kit Assembly kit Description 1 M10*16 Screws 2 Ø10 Washers 3 M8*16 4 Ø8 Washers 5 ST 4.2*13 6 M10*30 7 M10*45 5mm Allen Key 6mm Allen Key... -
Page 7: Assembly
2. Download the latest User’s Manual from noble-pro.com/support Note: If you are unable to register online please call Noble Pro technical support for assistance. 3. Place the right and left posts in the base frame. Connect the signal wire connection 163 and 55. - Page 8 4. Loosely fasten the posts use 4 x M10*45 (164) and 4 x M10*35 (167) screws with spring washer (165) and flat washer (166) to the base frame. 5. Connect the console signal wire (C) with the communication wire (163). Fit the console to the posts, be careful not to crush the wire, it should be clear of edges.
- Page 9 7. Place the screen on the console. Connect console wires to the screen wires. Connect A to A, B to B and C to C respectively. 8. Use 2 x M8*16 (182) screws with flat washers (183) to fasten the screen to the console.
- Page 10 10. Place the base frame covers (123/124) in place. Use the 4 x ST 4.2*13 (125) screws to fasten the covers to the base frame. 11. Remove the lock device holding the base frame to the running frame. 12. It is imperative to ensure that all parts are tightened before using the treadmill. It is advisable to place a protective mat under the treadmill.
-
Page 11: Heart Rate Monitor Chest Strap
HEART RATE MONITOR CHEST STRAP HOW TO USE THE HEART RATE MONITOR The use of a heart rate monitor allows free movement during exercise. The heart rate monitor contains a chest strap and a transmitter unit. To put on the heart rate monitor, place the chest strap around your chest and place the tab inside the buckle connection. -
Page 12: How To Use The Treadmill
HOW TO USE THE TREADMILL CONNECTING THE POWER CORD Use a Surge Suppressor The treadmill can be damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. - Page 13 HOW TO USE THE CONSOLE Quick Controls Weight Loss Fat Burner Pulse 5 km Hill Climbing Fitness Training Prog Bluetooth Sound ON/OFF Rev2.0 noble-pro.com...
- Page 14 USING THE TREADMILL HANDGRIP HEART RATE MONITOR The treadmill has built in handgrip heart rate monitors for when a chest heart rate monitor is not in use. Ensure to remove the protective plastic from the handgrips before use. For the most accurate heart rate reading stand on the handrails and avoid movement for 15 seconds or more.
-
Page 15: How To Fold And Move The Treadmill
TRAINING PROGRAMS The Noble Pro ® Elite 8.0 comes with a number of predefined training programs. The program can be selected using the Training Program or the quick selection buttons. 1. Selecting the pre-set program. Press the TRAINING PROG button and use the SPEED +/- buttons to select a program. The programs are graphically illustrated on the console next to the screen. -
Page 16: Maintenance And Troubleshooting
CAUTION: Make sure that the locking tube locks. To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 30° C. HOW TO LOWER THE TREADMILL 1. - Page 17 operate smoothly. Remove the key and UNPLUG THE POWER CORD. Run your finger along the underside of the belt. If there is no lubricant residue on your fingers lubrication is needed. To add lubrication to the walking belt. Remove the key and UNPLUG THE POWER CORD. Lift the walking belt in the centre from the running board.
-
Page 18: Trouble Shooting
TROUBLE SHOOTING Symptom Possible Causes Solution Treadmill does not turn A No power Plug in the power cable B. Safety key not detected Insert safety key C Faulty communication circuit Check control panel and communication cables D Treadmill power switch in "OFF" Turn the power switch to position the "ON"... - Page 19 A Missing safety key Place the safety key in the designated area B Faulty magnetic sensor The safety key magnetic --- or ----- sensor is stuck. Repair or replace magnetic sensor. A Communication cable faulty Reconnect the communication cables B Damaged communication cable Replace communication E01 &...
-
Page 20: Exploded Drawing 1
EXPLODED DRAWING 1 Rev2.0 noble-pro.com... -
Page 21: Exploded Drawing 2
EXPLODED DRAWING 2 Rev2.0 noble-pro.com... -
Page 22: Parts List
PARTS LIST Description Description Part Part Base frame Front wheel Motor base plate Allen key M8×45 screw Motor Washer Ø8×2.1 Socket M8×16 bolt Flat washer Ø8×1.6 Socket M8×12 bolt Nut M8 Spring washer Ø8×2.1 Rubber pad Flat washer Ø8×1.6 Transportation wheel frame Socket M8×90 screw Transportation wheel Motor cover... - Page 23 Description Description Part Part Front roller Allen key M10×30 screw Socket M8×60 bolt Monitor console base Flat washer Ø10×2 Allen key M8×16 screws Motor belt Flat washer Ø8×1.6 Running belt Allen key M10×20 screw Guiding hook Spring washer Ø10×2.5 Left side rail Washer Ø10×2 Right side rail Monitor front cover...
-
Page 24: Ordering Replacement Parts
All repairs or replacement needs to be authorized by Noble Pro. Noble Pro will not reimburse for any transport or courier service and will arrange for the product to be collected either by Noble Pro or a third party. The warranty is related to the delivery address of the client and additional collection and delivery fees may be applicable due to the extended distance.