Page 2
The SP-245 Accu-Max Spinning Riffler is normally wired for 110V/60Hz and is supplied with a power cord and plug. ALWAYS use a properly-wired, three-pronged plug, and connect the machine to a properly-wired, three- pronged grounded receptacle with appropriate electrical current for the machine.
Page 3
1. Install the pans on the turntable. Each pan has a lip which overlaps the top of the pan to its left. Lock the LEVEL the SP-245, and fasten it to the floor using anchor pans in place by sliding the sample pan retainer down bolts or other fasteners and the holes by which it was the drive shaft.
Page 4
Gilson Company, Inc. Accu-Max Spinning Riffler: SP-245 & SP-245F NOTE: A torque-limiting clutch for the drive system If problems of operation or questions regarding sampling is located under the coupling guard. Time and procedures arise, please call Gilson at 1-800-444-1508 environmental factors will affect the operation of for technical assistance.