Download Print this page

CCi TLEC Series Functions & Procedures

Download this manual

FUNCTIONS & PR

FUNCTIONS & PR OCEDURES

FUNCTIONS & PR

FULL TARE

NET WEIGHT INDICATOR

ZERO INDICATOR

NEGATIVE VALUE INDICATOR

AUTOMATIC OFF FUNCTION

BUILT-IN RECHARGEABLE BATTERY

AC ADAPTOR INCLUDED

CONVERTS TO METRIC

POSITIVE & NEGATIVE OVERLOAD PROTECTION

TLEC SERIES

FEATURES

OCEDURES

HOLD FUNCTION

BUBBLE BALANCE

LEVELING FEET

1" LCD DISPLAY

LOW BATTERY INDICATOR

OPTIONAL PLASTIC SCOOP

FROM 32 OZ. TO 50 LB

SEALABLE

Page 1 FUNCTIONS & PR FUNCTIONS & PR OCEDURES OCEDURES FUNCTIONS & PR OCEDURES OCEDURES FUNCTIONS & PR FUNCTIONS & PR OCEDURES TLEC SERIES TLEC SERIES TLEC SERIES TLEC SERIES TLEC SERIES FEATURES FULL TARE HOLD FUNCTION NET WEIGHT INDICATOR BUBBLE BALANCE...
Page 2 TLEC FUNCTIONS DEALER CALIBRATION DISPLAY/SEGMENT CHECK OFF-SET VALUE AUTOMATIC “OFF” FUNCTION The scale must be “OFF” at the onset for performing all functions. When instructed to PRESS a key, be sure to do so FIRMLY. When the scale is turned ON, weight automatically reads in “lb”. To convert to metric measure, press “MODE”.
Page 3 5,000 and 15,000. If the value is not within this range, you must adjust the off- set potentiometer on the rear PC board. If, upon adjustment, the value remains outside the proper range, contact CCi Scale Company Inc. for instructions. 5) Return to NORMAL operation by pressing “ON”...
Page 4 TLEC ERROR CODES “ERR 1” Overloaded The scale weighs from 0 to full capacity plus 9 divisions. The display will read “ERR 1” if overloaded. “ERR 2” Out of zero range Tare weight can be removed (tared off) by pressing “ZERO”. This range is from 0 to the full capacity plus 2 divisions.