Advertisement
indicates that the power is turned off when LED around the base is off.
(Turn on the power of loudspeaker box)
Long press the power button of the UFO, a voice prompt of booting up will
sound, and the breathing light will flicker.
(Turn off the power of loudspeaker box)
When the loudspeaker box is turned on, long press the power button of the UFO,
a voice prompt of turning off will sound, and the breathing light will go out.
Correct method to put the loudspeaker box and keep it under a state of
suspension
Hold the UFO with both of your hands, put it about 8 cm above the maglev base,
and slowly move it downwards to 3cm from the maglev base, while paying attention
to the four indicator lights. When all of them are on, stop moving and release your
hands.
About automatic connection
If the Bluetooth loudspeaker box is too far from the device, such as smartphone
and computer, due to the limit of Bluetooth signal, the loudspeaker box will
automatically disconnect with the device. When the device enters the connection
range again, the loudspeaker box will automatically connect with the device which
has matched with the loudspeaker last time.
Matching with Super Gravity via Bluetooth
Long press the power button of the UFO, a sound similar to the starting up of
engine will be given out, the loudspeaker box will enter a mode waiting to be
connected. After it is turned on, the breathing light will flicker normally by a
certain frequency, which can connect and match with a device with Bluetooth
function.
In the mobilephone setting, open the function of Bluetooth, search for "Super
Advertisement
