Advertisement
Quick Links
N5 Temperature Monitor Starter Guide
For N5-503-G/H and N5-553-G/H
External
Temperature
Probe**
Network Indicator
Charging Indicator
*Light Sensor & Temperature Sensors are available only on some SKUs
**In case of External Probe Sensor the Internal temperature sensor will not work.
Warning: The Internal Temperature cavity should be exposed to the ambient atmosphere where temperature
is to be monitored. This cavity should not be obstructed/covered/blocked by any object. Do not insert finger
or any object into this cavity. Please keep this are free from dust, water, and other particles.
Internal
Temperature
Sensor*
Report Indicator
Power Indicator
Light Sensor
Screw
Reset
Advertisement
Summary of Contents for nimble N5
-
Page 1: Temperature Sensor
N5 Temperature Monitor Starter Guide For N5-503-G/H and N5-553-G/H Internal External Temperature Temperature Sensor* Probe** Report Indicator Network Indicator Power Indicator Charging Indicator Light Sensor ... - Page 2 How to install Micro SIM Card Step 1: Carefully remove the back cover by releasing all plastic latches Front Cover Back Cover Open here using a plastics ...
- Page 3 Step 3: Install the Micro SIM in the sim card slot SIM card slot Micro SIM card Install the SIM card as shown. The logo upwards and ...
- Page 4 Step 5: Install the back cover and press it firmly at the edges to lock it. Install the screw (provided in the box). Screw Reset ...
-
Page 5: Led Indicators
How to Install the Waterproof Rubber Cover: Sensor seal cover Internal Temperature Sensor LED Indicators Nimble Logo External Temperature Probe USB Power connector ... - Page 6 Device hanger Device back plate Device holder External Temperature Probe USB Power connector Note: Before placing the device in the rubber cover make sure the SIM and the Battery are inserted. ...
- Page 7 Step 1: Place the device inside the rubber cover such that the backside of the device faces front. Insert the USB connector as shown in the figure through the rubber cover. Stick the device with Anabond glue to the rubber cover. USB Power connector Step 2: Fix the back side plate as shown in the below. Device back side Device Water proof cover USB Charger External Temperature Probe...
- Page 8 Step 3: Seal the back side cover with Anabond glue. Place the sensor seal cover in the front and shown and fix it. Please contact product-support@nimblewireless.com for support. ...
-
Page 9: Charging The Device
Charging the device Charging the device: Insert the micro-USB connector at one of the charging cable into the micro-USB charging port of the device and connect the USB end of the cable to the Charger ... - Page 10 Installing in Refrigerated Truck Refrigerated Trailer Temperature Driver Side Probe Nimble Temperature Refrigeration unit Road Side Road Side Grille Road Side Grille USB Power DC to DC Battery to DC cable Refrigeration unit battery Refrigeration unit...
- Page 11 Temperature Probe Road Side Road Side Grille Radiator Nimble Temperature Monitor Refrigeration Unit Charger • Place the device on the road side grille • Place the front side of the device is facing the road • Make sure the device is placed intact inside the grille ...
- Page 12 Download the Application Nimble IRIS is available for both Android and iOS operating systems. For Android: Go to the Google Play Store on your phone. Search for Nimble IRIS application in Play Store. Download and install the application from Nimble Wireless.