Page 5
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. INSTALLATION AND OPERATION INSTRUCTIONS FOR LDM RANGE EMERGENCY LIGHTING PRODUCTS INTRODUCTION The LDM range comprises a high quality emergency LED control module complying to international safety and performance standards IEC 61347-1, IEC 61347-2-7, IEC 61347-2-13, IEC 62384 and IEC 60598-2-22, and an appropriate high temperature NiCad or LiFePO battery pack.
Page 6
DALI COMMUNICATION (DALI/ST MODULES ONLY) DALI modules will respond to DALI commands from a suitable control unit, and these commands can be used to initiate function and duration tests at prescribed times. The status flags for the module are set after a test, for reporting and logging of the results. DALI /Self-test module local LED indicator Permanently on System OK/mains operation mode...
Need help?
Do you have a question about the LDM Series and is the answer not in the manual?
Questions and answers