Summary of Contents for Furious FPV Smart Cable
- Page 1 SMART CABLE USER MANUAL VERSION 1.0 Please contact us if you need further assistance: Tech support: tech@furiousfpv.com Sales support: sales@furiousfpv.com Website: http://furiousfpv.com/...
- Page 2 CONTENTS Features .......................... 2 How To turn ON/OFF Smart Cable? ................2 Usage ..........................2 Status Screen ......................3 Load Screen ......................3 Settings Menu ....................... 4 LOW VOL – Low Voltage Warning ..............4 Imax (Current Max) – Overload Warning ............4 ...
- Page 3 Balance Wire Protection Clip Ultra Long 125cm Wire Length How To turn ON/OFF Smart Cable? - ON: Press then press + hold the button until Load Bar on the OLED is full - OFF: At the Load Screen, press then press + hold the button until Load Bar on the OLED is empty.
- Page 4 *Note: When you are at “Settings Menu” and want to go to Load Screen. Please select Exit to come back to Status Screen. Then, press + hold button to go to Load Screen. Status Screen Show Voltage remaining and the running texts to guide into the Settings mode. Voltage Remaining The running texts to guide into Settings mode ...
- Page 5 Settings Menu *Note: When you turn on the Smart Cable and don’t plug it into your device. After 2 minutes, the buzzer will give a warning and then shut down. LOW VOL – Low Voltage Warning Warning by buzzer and OLED displays “LOW VOL!” when voltage remaining is lower than the configured low voltage level.
- Page 6 Support The reseller you purchased your product from handles the first line of support. If you encounter any problems with your Furious FPV products, please contact them first on issues involving equipment from other brands and general support for Furious FPV products.
Need help?
Do you have a question about the Smart Cable and is the answer not in the manual?
Questions and answers