Advertisement
Advertisement
Table of Contents
Summary of Contents for Xilence SPS-XP series
- Page 1 User Manual...
- Page 2 English Precautions Installation Troubleshooting User Manual...
- Page 3 Precautions Please read this manual fi rst before you start to use your power supply. Keep and hold the manual ready for any question that might occur. Parts within a power supply generate dangerously high voltages even after the power supply has been switched off for some time. Therefore the power supply must never be opened! All electrical parts within the power supply do not need any maintenance by the user.
- Page 4 Installation A screwdriver for recessed head screws is needed to install and fi xate the power supply unit to the computer case. Please carry out the installation as follows: 1. Disconnect your computer from the mains and also all those connected equipment pieces and drives before you remove your old power supply unit.
-
Page 5: Troubleshooting
Troubleshooting Should your system still not function despite having installed it properly, please check all possible causes in the following order: 1. Check and make sure the power supply’s power connectors are properly fi xed to all the diff erent devices connected to the power supply, as well as the power cable to the power supply itself. - Page 6 WARNING WORKING WITH ELECTRICAL CURRENTS CAN BE EXTREMELY DANGEROUS. At the fi rst sign of instrument malfunction, smoke, damaged cables and the actions of liquids or foreign objects you must immediately disconnect the power supply unit from the mains; do not use your computer until it has been thoroughly tested.
- Page 7 User Manual...
Need help?
Do you have a question about the SPS-XP series and is the answer not in the manual?
Questions and answers