Cutter Deck; Approximate Dimensions - Scag Power Equipment STT-31BSD Operator's Manual

Section 3

CUTTER DECK

Type:
Construction:
True Cutting Width:
Cutting Height Adjustment:
Cutter Blades:
Cutter Deck Drive:
Blade Engagement:
Discharge Opening:
Caster Wheels:
Spindles:
Spindle Pulleys:
Cutter Deck Belts:
Anti-Scalp Rollers:
ADDITIONAL SPECIFICATIONS
Seat:

APPROXIMATE DIMENSIONS

Length:
Tracking Width:
Width:
Width (with discharge chute up):
Height:
Turning Radius:
Weight:
PRODUCTIVITY
The following chart will aid you in determining how many acres your Scag mower will cut per day.
The chart is an estimate based on 8 hours per day cutting time at 7 MPH with an allowance for overlap and turns calculated in.
Cutting Width: 61"
Acres Per Day: 27
Date of Issue: October, 2004
Specifications Subject To Change Without Notice
SPECIFICATIONS (CON'T)
SCAG "SABRE TOOTH TIGER" ZERO-TURN RIDER
MODEL: STT– 31BSD
SMST-72A ("Advantage") & SMST-61A ("Advantage") - Floating, adjustable anti-
scalping, hybrid design combines out-front and belly-mount designs. "Advantage" -
special extended front edge allows Bahia or other tough grasses to enter the deck
standing upright for a clean cutting.
10-gauge steel top reinforced with 7 gauge support plate, deck skirt is 7 gauge steel
72" cutter deck = 71.5 inches (181.6 cm); 61" cutter deck = 61.0" (155.0cm)
Foot-operated pedal adjustment from operator's seat,
1" to 6" in 1/4" increments
72" = Three (3) 24" blades; 61" = Three (3) 21" blades
Drive shaft to 90 degree gear box
Electric blade engagement clutch with control panel knob
Extra wide 11.5" discharge opening with spring loaded discharge chute
13 x 5 x 6 caster wheels with tapered roller bearing pivots
Heavy duty 1-1/8" top dimension spindle shaft, cast housing, taper roller bearing, low
maintenance with top access grease fitting and grease overfill relief poppet
Split Steel with easily removed taper hubs
B-section with Kevlar cord
Two front, two rear 4-1/2" adjustable, two rear 12" fixed
Thick padded seat cushions with special springs. Padded arm rests, lever adjustment
forward and back.
72"
92.0"
56.0"
83.0"
73.0"
43.0"
zero radius turning
1635 lbs.
72"
32
61"
89.5"
56.0"
73.0"
63.0"
43.0"
zero radious turning
1600 lbs.
11