Advertisement
Quick Links
Advertisement
Related Manuals for Real Flame KJELL
Summary of Contents for Real Flame KJELL
- Page 1 KJELL WOODHE TER INST LL TION & OPER TING M NU L VERSION 4...
- Page 2 It is necessary to quote the model number and the serial number on the data plate when ordering parts. ttention Before use, inspect the Kjell fireplace for any transport damage. Please report any transport damage found to the place of purchase before proceeding with installation. D T PL TE...
- Page 3 STRUCTURE OF THE FIREPL CE Figure 1.1 Ash Pan Figure 1.2...
- Page 4 Figure 1.3 Figure 1.4 Figure 1.5 Figure 1.6...
- Page 5 INST LL TION INSTRUCTIONS CLE R NCES Figure 1.7 Figure 1.8...
-
Page 6: S Fety Instructions
S FETY INSTRUCTIONS This appliance has been certified under the requirements of AS/NZ2918. • Before the first commissioning and connection to the flue, these user instructions must be read thoroughly. • It is recommended to use clean cotton gloves for the setting of the appliance in order to avoid fingerprints on the paint, they can be difficult to remove later. - Page 7 (continued) S FETY INSTRUCTIONS • Ensure 4m of air is supplied for each kW of rated performance. For this fireplace the room should be at least 32m . If the room is smaller than this then sufficient air supply can be secured by opening doors to adjoining rooms or installing vents with free area of at least 150cm •...
- Page 8 OPER TING INSTRUCTIONS First kindling Note: Before installation, remove the securing element used for transportation from the baffle plate over the combustion space. (See fig.1.4 on page 4) Warning! Upon first kindling smoke and an unpleasant smell may be generated. Ensure proper ventilation of the room by opening windows and doors and heat the fireplace to maximum rated heating performance.
-
Page 9: Cle Ning Nd M Inten Nce
CLE NING ND M INTEN NCE After the heating season it is recommended that the fireplace and flue are cleaned. Poor heating performance is almost always the consequence of dirty flues. To clean, pull the baffle plate forward (see fig.1.4 on page 4) the flue can then be cleaned from the inside or after removing the cowl, from above. - Page 10 TECHNIC L INFORM TION Type Kjell Nominal performance 8.0kW Heating capacity (m • Under favourable • Less favourable • Not favourable heating circumstances (according to 18893/TAB2 DIN standard) DIMENSIONS...
- Page 11 Freestanding Universal/Default Kit Perforated 6˝ - 8˝ - 10˝ System...
- Page 12 GLEN DIMPLEX AUSTRALIA PTY LTD ABN 69 118 275 460 Head Office/Factory/Showroom 1340 Ferntree Gully Rd. Scoresby Vic 3179 Ph: (03) 8706 2000 Fax: (03) 8706 2001 E-mail: info@realflame.com.au Richmond - VIC Showroom 300 Swan St. Richmond Vic 3121 Ph: (03) 9428 4443 Fax: (03) 9428 4445 Dandenong - VIC Showroom 3/328 South Gippsland Highway, Dandenong South Vic 3164...
Need help?
Do you have a question about the KJELL and is the answer not in the manual?
Questions and answers