ASKA ELECTRONICS F6PA User Manual

F6PA
Wireless Stereo Heandphone

User Manual

How to use
1. General Function
Operation
LED Status
Power on
Blue LED flashes 2 times
Power off
Red LED flashes 2 times
Pairing
Red LED & Blue LED flashes alternately
Standby
Blue LED flashes 3 times in 5 seconds
Incoming call
Blue LED slow flash
Low battery
Red LED flashes 2 times every 2 seconds
Red LED keeps lighting during charging
Charging
Blue LED keeps lighting charging finished
2, Basic Buttons Operation
Power on: Press multifunction button"
Blue LED flashes 2 times.Headphone turned on.
Power off: Press multifunction button"
Red LED turn off after flashes 2 times,Headphone
turned off.
Volume adjust: Press volume up "+" or volume down
button "-", then one level volume changes.When volume
reaches to Max or Minimum,"Tick"reminding voice occurs.
Play/Pause: Short press multifunction button"
music pauses. Press it again, music continues.
" for 2 seconds.
" for 3 seconds.
" ,
3

Get started

Congratulations! Thank you for choosing F6PA
BT stereo headphone. Before using F6PA, users
should read this manual to familiarize themselves
with the BT functions of your mobile phone
or other devices.
Features
1. BT 4.1
2.3.5mm music line-in function
3.Support connecting with 2 phone devices
4.The headphone battery power status showed on iOS
5.aptx® audio technology
Connection Diagram
Previous: Short press previous button "<", music turns
to previous one.
Next: Short press next button ">", music turns to next
one.
Answer Call: Short press multifunction button"
answer the incoming call.
End call: Short press multifunction button"
call ended.
Reject call: Press Volume up button "+" for 2 seconds
to reject a call.
Transfer call:
During the phone call conversation, press
volume up button "+" for 2 seconds, call switched to
mobile phone. Press volume up button "+" for 2 seconds
again, call switched to headphone.
Last number redial:
In standby status ,continuously
press headphone multifunction button"
redial the last number.
Call Mute function:
Press Volume down button "-" for 2
seconds, call mute. Press volume down button "-" for 2
seconds again, call mute function cancelled.
Battery Capacity status:
to iOS devices, iOS devices show the headphone battery
power status on the upper right corner.
Charging:
New headphone has enough power for
pairing and dialing out for several times. When in low
battery, please charge via USB cable for 2 hours. Red
LED keeps lighting during charging, blue LED keeps
lighting, charging finished.
2
", phone
" twice to
When headphone is connected
4
" to