Summary of Contents for Steam-e Gum-e
- Page 1 GUM REMOVER Operating Instructions - June 2018 A Steam-e® product. © 2018 All Rights Reserved.
-
Page 2: Register Your Machine
Address: Phone Number: Company name of owner: 12 month warranty registration Thank you for purchasing your Steam-e product. ® Warranty registration is quick and easy online. Your registration will allow us to serve you better over the lifetime of the product. -
Page 3: Table Of Contents
Step 5 - Start the machine Step 6 - Remove the gum Step 7 - Agitate the gum with the brush Step 8 - Turn off the machine Maintenance: Warning Indicators De-scaling Troubleshooting Consumables sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 4: How To Use This Manual
21.2 Ah Model: Gum-e Safety label location: Inside of front door IP Rating: IP55 Heater Power: 250w Max Machine Weight: 14 kgs Steam-e Holdings Ltd. Lysses Court, Fareham, Hampshire PO16 7BE United Kingdom sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 5: How This Machine Works
The gum removal solution as supplied by Steam-E Technology is the only approved chemical to be used with the Steam-e appliance. Using any other chemical not approved by Steam-E Technology will invalidate the warranty and will likely cause damage to the internal components of this appliance. -
Page 6: Dimensions
Packaged dimensions: 635 x 530 x 910mm Technology: Lithium ion GUARANTEE Voltage: 36 volt Standard: 1 year guarantee Amp hours: 21.2 Ah Extended: Extended service available Weight: 4.5 kgs Run time: 240 minutes sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 7: Main Components
Children should be supervised to ensure that they do not play with the appliance. sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 8: Step 1: Pre-Run Set Up
A nylon brush should be used for cleaning carpets, mats, upholstery and surfaces, which could be scratched by using a brass brush. sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 9: Step 4: Add The Gum Removal Solution
Place the brush on the piece of flattened gum and wait for approximately 3 seconds to soften first. sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 10: Step 7 - Agitate The Gum With The Brush
OFF and the same with the power on the machine. Disconnect the battery by removing the connector from the internal socket. Place the wand sections inside the machine. Leave any remaining fluid in the reservoir for next use. sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679... -
Page 11: Maintenance
3. Run for a minimum of 5 minutes which will descale the machine and reset the descale timer. Make sure you empty the machine of all descaler, add fresh water and run for 1 minute to remove all trace of descaler. Only use a Steam-e de-scale solution to prevent damage to the Gum Remover. -
Page 12: Troubleshooting
Steam-e ® ® Nylon brushes Available from all approved Steam-e distributors or directly from Steam-e ® ® Re-ordering consumables To re-order any consumable items email: sales@steam-e.com or contact your distributor. sales@steam-e.com www.steam-e.com +44 (0) 1329 239 679...
Need help?
Do you have a question about the Gum-e and is the answer not in the manual?
Questions and answers