Oregon Scientific Boombero GREAT WZP388 Instruction Manual

Boombero GREAT
Model: ZP388
Instruction manual
EN

PRODUCT OVERVIEW

1. NFC / Status LED indicator
2. Charging LED light
3. DC in port
4. Line in port
5. Power on/off

CONTENTS

1. Boombero GREAT.
2. USB cable
3. Line-in cable

SET UP

1. Plug the BOOMBERO GREAT into an outlet using the included wall charger.
2. The Charging LED light will turn white when it is fully charged. It would take
around 2.5 hr for full charge.
Note:
 Please charge the battery at least 3 to 4 hours at the first time.
®
PAIRING BLUETOOTH DEVICE
1. Pair your Bluetooth ® device to the speaker when you turn on the speaker for
the first time.
2. The speaker pairs with devices that use the Bluetooth ® Hands Free Profile
(HFP) and/or the Advanced Audio Distribution Profile (A2DP). HFP enables
hands-free communication and the A2DP dictates how audio is streamed from
one device to another over a Bluetooth® connection.
3. When you pair devices to the speaker, the devices operate accounting to their
protocols.

NFC FUNCTION WORK FLOW

1. Please upload NFC- BT Easy to your Android operated smart phone with NFC
function if your android platform is under 4.1 version
2. Please be reminded to turn on your smart phone's Bluetooth connection
3. Tap your smart phone to NFC sensor region at the top of speaker. This refers to
"NFC" wording in white color
4. Then your smart phone will instantly pair with Bluetooth speaker for music
enjoyment
5. To disconnect it, please tab your connected smart phone at NFC sensor region
again
Note:

Please ensure your smart phone is equipped with NFC function.

To ensure your smart phone got NFC function, please find updated NFC
phone list at below website at http://www.nfcworld.com/nfc-phones-list/
PAIRING MODEL AND PAIRING
unit the voice "Hi BOOMBERO is on" and press
1. In Press and hold
enter the pairing mode
2. Prepare your Bluetooth ® device (mobile phone or music player) to pair.
3. Select the searching mode on your Bluetooth ® device
4. Your Bluetooth ® device should find "BOOMBERO Great", select it and pair it
5. Verify that you are connected to the speaker. The Bluetooth ® LED & the
speaker will change to a solid blue when paring is complete
6. Bluetooth activated/ talk
7. MAXX
8. Play/Pause
9. Volume up
10. Volume down
KEY FLOWS
Status:
Status: "OFF" stage with rechargeable batteries not fully charged
1.
DC Plug in  "RED" charging LED breathe 2 seconds
a.
Status: "OFF" stage with rechargeable batteries FULLY charged
2.
DC Plug in  "RED" charging LED flash and them off
a.
3. Press & Hold the
Standby mode
Status: "Standby mode"
4.
a. Line in plug in Play music immediately
b. Press & Hold
Bluetooth pairing mode and connect with your Bluetooth ® devices
c. Press & Hold
Status: "Bluetooth connected"
5.
"RED" LED Light on ( power-on state )
a.
Bluetooth signal disconnected  Searching 10second and then enter
b.
standby if no further signal connected
c. Line in plug in Music channel change to line in signal immediately and
resume Bluetooth channel immediately when line in plug out
d. Press & Hold the
"BLUE" LED indicator flash
6. Status: Music playing
a. Press and then the music volume are going down
7. Status: Music playing
a. Press
8. Speaker Phone
a. When phone calling
b. Answer a call - Press the
c. Reject a call - Press Hold ( 3 seconds ) the
call
Hang-up a call – Press the
d.
9. Play / Pause Button
When playing music, - Press
Press again, music resume playing (Volume are resume to before)
10. MaxxBass On / Off Button
a. When playing music (Bluetooth or Line-in)
- Press "
- Press "
- Press "

LINE-IN FUNCTION

1. Plug in the line in cable into the rear of the speaker Aux in socket.
2. Connect the other end of the line in cable to your devices headphone socket.
3. Recommend to play the speaker unit at maximum sound level.

SPECIFICATIONS

Power input:
Total output:
to
Playtime (via Bluetooth
Recharging Time:
Dimension:
Audio input
Wireless
Built Battery
3 second and power on the unit and then enter into the
1second : "BLUE" LED flash alternatively, Enter to
in 1second and then turn-off the unit.
in 1second  enter Bluetooth pairing mode,
and then the music volume
to enter conference call
to hang-up the call
, music playing Pause
(Default are ON when power on)
"– Turn off MaxxBass function
"again – Turn On MaxxBass level 1
"again – Turn On MaxxBass level 2
5V, 2A
8W, (4W/Channel)
Passive Radiator
®
connect): Approximately 8~10 hours
25 hours
208 X 65 X 91mm
3.5mm Line-in jack, Bluetooth 3.0(A2DP)
Bluetooth 3.0, NFC
3.7V, 2200mAh Li-Polymer battery
are going up
to cut the incoming