Table of Contents
Advertisement
1 Safety
1.1 Hazards when handling the heat exchanger
®
BOWMAN
Hazards may still arise from operation, such as:
-
-
-
-
Any person involved with the installation, commissioning, operation, maintenance or repair of the heat
exchanger must be:
-
-
-
The heat exchanger must only be used for its intended purpose.
In the event of breakdowns which may compromise safety a suitably qualified person must always be
contacted.
1.2 Approved use
®
BOWMAN
specified by BOWMAN
arising from such use.
The maximum permissible operating pressure must not exceed:
Oil (primary side)
Water (secondary side)
Applies to EC-RK three pass threaded connections only – for other versions please contact
®
BOWMAN
The maximum permissible operating temperature must not exceed:
Oil (primary side)
Cooling Water (secondary side) :
Variants with higher temperature and pressure ratings are available. Please contact the Sales for further
details.
Rev D
Hydraulic Oil Coolers are constructed to current practice and recognised safety standards.
Injury of the operator or
Third parties or
Damage to the heat exchanger or
Damage to property and equipment
Physically and mentally capable of performing such work
Appropriately qualified.
Comply completely with the installation instructions
Hydraulic Oil Coolers are only approved for cooling hydraulic oil. Any other use unless
®
is not approved. BOWMAN
:
:
for guidance.
:
®
declines all liability for damage associated or
20 bar max.
16 bar max.
120 Deg.C
110 Deg.C
4
Advertisement
Table of Contents
