paladin P4009 Installation And Owner's Manual

PARTS LIST

Index Part No. Description
1 90-970100-000 Highway Bar, Left
2 90-970101-000 Highway Bar, Right
BAG 380
3 51-515720-000 Screw, M8 x 20
4 51-513105-000 Screw, M10-1.25 x 105
5 37-371590-000 Frame Bracket
6 51-513050-000 "U" Bolt
7 42-431010-000 Whizlock Nut, Chrome
8 49-490311-200 Washer, Flat
Ball End Hex Key, 6mm
Hex Key, 8mm
10mm and 14mm Socket
Wrench 14mm
Wrench, 1/2"
Handle with 3/8" Drive
Torque Wrench
Service Manual

INSTALLATION TO VTX 1800 C

1. Ensure that the motorcycle is on flat level ground.
2. It is recommended that the motorcycle sit for at least one
hour prior to installation to allow the engine to cool.
3. Remove the three radiator mounting bollts and allow the
radiator to hang from the hoses (10mm Socket).
Install Frame Bracket
Note: to facilitate installation of the Whizlock Nuts to the "U" Bolt,
loosely pre-assemble the Frame Bracket to the "U" Bolt with
threaded ends of "U" facing outward.
4. From the front, place the "U" Bolt on the frame down
tube near the top of the engine. Figure 1. Loosely install
Frame Bracket with Flat Washers and Whizlock Nuts (1/2"
Wrench.) Orient assembly so Whizlock Nuts face engine.
Do not tighten. Figure 2.
By National Cycle
Qty.
1
1
4
3
2
2
4
4
Page1 of 2
INSTALLATION AND OWNER'S MANUAL
for HONDA® VTX1800 C
NOTE:
Right and Left side of Motorcycle is determined
while sitting on the bike.
1
Parts List
7
8
Figure 1
Figure 2
P4009
7
5 2
8
6
6
Once your frame
bracket is loosely
assembled, rotate
bracket so whizlock
nuts face engine.
10-114850-000 04/03
3
4