Adjusting the "ADJUST" items under "PICTURE MODE"
1
Press V or v to select the
desired item (e.g.,
"COLOR"), then press
ENTER.
2
Adjust the value according to the following table, then press ENTER.
For
"PICTURE"
"COLOR"
"BRIGHT"
"HUE"*
"SHARP"
* You can adjust "HUE" for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "PERSONAL".
Tip
• For details on the menu system and how to use the menu, refer to
ENTER
Press v/B to
decrease picture contrast
decrease color intensity
darken the picture
increase red picture tones
soften the picture
Introducing the menu system on page 19.
ENTER
COLOR
Press V/b to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
Adjusting Your Setup (MENU)
80
23