General Safety Instructions Safety Stickers Warranty Product Description and Specifications INSTRUCTIONS FOR USE Fitting A Jackhammer Using the JHT Servicing the JHT APPENDIX BLOCK SETS BREAKDOWN HAZARD ASSESSMENT C. SALES AND SPARES JHT Operator’s Manual Rev 0117 Page 2 of 17...
PROHIBITED with the machine. Disclaimer MAKINEX, and its affiliates, takes no responsibility for any damage, injury or death resulting from the incorrect or unsafe use of this machine. Use of this machine should be undertaken by competent persons only. It is the operators’ responsibility to ensure that the following safety procedures are followed.
There is a safety and information panel provided on the front of the Jackhammer Trolley to alert the user of potential safety risks/hazards. Please read and adhere to all instructions on the Unit. JHT Operator’s Manual Rev 0117 Page 4 of 17...
Page 5
It is forbidden to remove any safety or instructional stickers or panels from the PROHIBITED Jackhammer Trolley Read all safety and instructional stickers displayed on each component of the READ Jackhammer Trolley CAREFULLY JHT Operator’s Manual Rev 0117 Page 5 of 17...
Cosmetic defects such as decals and coating. • Failures due to acts of God and other force majeure events • beyond the manufacturer’s control. Problems caused by parts that are not original MAKINEX parts. • JHT Operator’s Manual Rev 0117 Page 6 of 17...
Page 7
Manufacturer. It is the responsibility (and cost) of MAKINEX or our appointed agent to return the machine to be repaired or replaced under warranty to the consumer- this is valid for domestic territories only (e.g.
Page 12
Step 4: Brake Lever Adjustment Instructions 1. Ensure cable is not kinked anywhere along its length JHT Operator’s Manual Rev 0117 Page 12 of 17...
5. Refer to Hammer/Breaker Instruction Manual for more detail on operation and service Always switch off machine before unplugging WARNING Servicing the Hammer Trolley Every Use: ▪ Inspect frame for damage JHT Operator’s Manual Rev 0117 Page 13 of 17...
Page 14
Drip light weight oil from the top of the cable so it runs through the cable housing ▪ Grease the pivot axle APPENDICES A. BLOCK SETS BREAKDOWN B. JACKHAMMER TROLLEY - HAZARD ASSESSMENT C. SALES AND SPARES JHT Operator’s Manual Rev 0117 Page 14 of 17...
Page 15
Appendix A – BLOCK SETS BREAK DOWN Appendix C – Hazard Assessment JHT Operator’s Manual Rev 0117 Page 15 of 17...
Appendix B – JHT Risk Assessment JHT Operator’s Manual Rev 0117 Page 16 of 17...
Page 17
Appendix C – Sales and Spare Parts For sales and spare parts please refer to your local distributor or contact us on www.makinex.com sales@makinex.com www.makinex.com.au sales@makinex.com.au JHT Operator’s Manual Rev 0117 Page 17 of 17...