Summary of Contents for Star Manufacturing International CSD-1_PB
- Page 1 Star Manufacturing Installation International Inc. Operating 10 Sunnen Drive Instructions St. Louis, MO 63143 Phone: (314) 781-2777 2M-Z3605 Rev. E 8/6/02 Fax: (314) 781-3636 SINGLE PERISTALTIC CHEESE DISPENSER MODEL CSD-1_PB...
-
Page 2: Product Identification
PRODUCT IDENTIFICATION Star Mfg. International, Inc. Single Peristaltic Cheese Dispenser, Model CSD-1_PB SPECIFICATIONS: Capacity: Two 6 pound bags Electrical: 120V; 650 Watts; 60 Cycle; single phase Dimensions: 9 9/16" W x 19 9/16" D x 27" H Net Weight: 42 lbs. -
Page 3: Installation
Loading Product CAUTION 1. Turn dispenser OFF. 2. Unhook the tension spring from the catch. 3. Slide the pump block away from the pump This equipment is designed and sold for head. commercial use only by personnel trained and 4. Insert the new bag into tray and route the tube experienced in its operation and is not sold for around the rollers. -
Page 4: Checking Product Temperature
To set portion: The pump mechanism should not need cleaning during normal use. If product should spill onto the 1. Load preheated product pouch into dispenser pump head, it can be removed for easy cleaning. 2. Dispense product until there is a steady flow To remove and clean the pump head: 3. - Page 5 Visit our Website at: www.star-mfg.com Email: service@star-mfg.com For Fax-On-Demand Literature: (800) 807-9814 THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit.
Need help?
Do you have a question about the CSD-1_PB and is the answer not in the manual?
Questions and answers