Table of Contents
Advertisement
Quick Links
Beam Overview
Charging Light
Shows battery level
while charging
Wi-Fi Light
When this light stops
flashing you can
connect your device
Power Button
Power On: Press and
hold for 3 seconds
until Power Light
turns on
Power Off: Press and
hold for 3 seconds
until Power Light
turns off
Battery Level:
Quickly press power
button to view
battery level
GoChip Channel
GoChips
magnetically snap
in place
Battery level colors
>90% charge
10–90% charge
Power Light
On/Off and battery
level indicator
Charging Port
Use the included
cable to charge
your Beam
Password
Label
Shows the Wi-Fi
Network name
(GoChip...) and
a password for
connecting to the
Beam from your
mobile device
Reset Button
Reset to factory
settings with end
of paper clip. See
gochip.com for
details
<10% charge
Getting Started
Download app
Visit gochip.com/apps on your phone, tablet or PC to download the GoChip
Player app, then create an account and log in.
Power on Beam
Press and hold the power button for 3 seconds until the right light turns on.
You can connect when the Wi-Fi light stops flashing.
Connect your device
On your mobile
device, open
Settings > Wi-Fi
to connect to the
GoChip Beam
Note: this message is normal since you are now
(see label on
connected to the Beam, not the Internet.
your Beam for
network name
and password), then wait for an indication that your device is connected.
Please note: when you connect to your Beam, your device may let you
know that you are no longer connected to the Internet. This is expected
behavior because you are now connected to the Beam and not to the
Internet—giving you access to all your movies & TV shows without Internet
access or downloading.
Just Play!
Start the GoChip Player App and enjoy your movies and TV shows. You can
connect up to 8 devices at the same: each person playing what they want,
when they want. You provide the popcorn, we provide the fun.
Power off Beam
Press and hold the power button 3 seconds until the power light turns off.
Need help or want to learn more?
Visit gochip.com/beam
For more information visit gochip.com
Advertisement
Table of Contents
Summary of Contents for GoChip Beam
-
Page 1: Getting Started
3 seconds Please note: when you connect to your Beam, your device may let you until Power Light know that you are no longer connected to the Internet. This is expected... - Page 2 FCC and IC Notice Federal Communications Commission (FCC) Statement appareils radio exempts de licence. L’exploitation est autorisée aux deux condi- tions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur You are cautioned that changes or modifications not expressly approved by the de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouil- part responsible for compliance could void the user’s authority to operate the lage est susceptible d’en compromettre le fonctionnement.”...
Need help?
Do you have a question about the Beam and is the answer not in the manual?
Questions and answers