Vertex Rx-C 6D Instruction Manual

Vertex™ Rx-C 6D Calcium Reactor
Thank you for your purchase of the Vertex™ Rx-C 6D Calcium Reactor. Please be sure to read and follow this brief
guide to ensure proper install and operation of your device.
In the box:
1) Primary Chamber
2) Secondary Chamber
3) CO2 Interface Chamber
4) Bubble Counter
5) Flow Meter
6) Sicce™ Syncra 1.5 / Custom Bracket
7) PVC Pump Head
8) Reactor Base
9) Precision Needle Valve
10) Red, White & Black LLPDE tubes / 3m (6') length each
11) CO2 Chamber Media
12) Sicce™ Syncra 1.5 Instruction Manual
13) Vertex™ Rx-C 6D Instruction Manual
Important Safety Warnings:
This is an electrical device operated in close proximity to water; be cautious, follow instructions and use
common sense.
Do not touch the plug and/ or the electrical outlets with wet hands. Always dry your hands first.
Rx-C 6D and its components are solid heavy objects, impact can cause bodily harm, loss of life and/ or
damage to property.
Do not attempt to service the unit while in operation or connected to electricity.
Unless you are qualified; service only by authorized service professionals.
Do not attempt to alter the product. Do not attempt to alter the Motor-Block or the Impeller Assembly.
Do not touch the impeller and/ or attempt to turn the Impeller when the unit is connected to power.
Ensure the product is free of defect and properly assembled before putting in operation.
Drip-Loop is required where the Power-Cable is connected to the Power-Outlet.
Do not carry, lift or hold the pump or the reactor by its cable.
Do not carry, lift or hold the reactor by its upper manifold. To service or move the reactor; do so one
chamber at a time. Do not lift or carry the reactor while assembled on its base.
Vertex™ Rx-C 6D Calcium Reactor / Instruction Manual
© Vertex Aquaristik ™GmbH, Deutschland 2014