Troubleshooting - Primos Alpha Dogg 3756 Instructions Manual

. UPLOADING NEW SOUNDS OR EXPERT™ HUNTS (PC & MAC COMPATIBLE) .
1. Turn power on speaker and computer. Using USB cord, connect cord to USB Connection on back of Speaker
[Alpha Dogg] and inside battery compartment [Turbo Dogg]. Then connect USB cord to computer.
2. Alpha/Turbo Dogg folder should automatically pop up. Simply copy and paste sounds to the sound folder
of your choice.
3. Disconnect USB from computer by following USB removal instructions on your computer.
4. Remove USB cable for Speaker.
5. Leave Speaker on and turn on Remote. May take a few seconds for Remote to download updated
information from Speaker.
6. Caller is ready for use.
. CARING FOR YOUR CALLER .
Your caller contains sensitive electronic components that can be permanently damaged if exposed to excessive
shock or vibration. To minimize the risk of damage to your unit, avoid dropping your unit and operating it in high-
shock and high-vibration environments.
- Do not store your unit where prolonged exposure to extreme temperatures can occur, because it can
cause permanent damage.
- Do not expose to prolonged exposure to moisture. This can cause this unit to malfunction.
- Never use a hard or sharp object to operate this unit or damage may result.
Cleaning the Unit:
The Alpha/Turbo Dogg is constructed of high-quality materials and does not require user maintenance other than
cleaning. Clean the outer casings (not the screen) using a cloth dampened with a mild detergent solution, and then
wipe dry.
Avoid chemical cleaners and solvents that can damage plastic components.
Cleaning Screen:
Clean the screen with a soft, clean, lint-free cloth. Use water or eyeglass cleaner, if needed. Apply the liquid to the
cloth, and then gently wipe the screen.
Caution: The caller is water resistant - not waterproof.
. TROUBLE SHOOTING .
Check batteries in speaker and remote control if caller is not functioning properly.
Check to make sure antenna signal indicator appears on remote if caller is not functioning properly. Move remote
closer to speaker until antenna signal indicator appears on remote.
If call continues to function incorrectly, call Customer Service at 601-879-9323.
. FCC STATEMENT .
Changes not expressly approved by Primos could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does