Maintenance And Care - Air Burners S-100 SERIES Operating Manual

S-100 Refractory Walled Air Curtain Burner with HATZ 3H50TIC Diesel Engine
OPERATING MANUAL

MAINTENANCE AND CARE

WARNING:
1
Should any repairs become necessary that require
welding on your FireBox, you MUST first physically
remove the Electronic Control Module (ECM) from
the computer controlled diesel engine.
1
Follow the instructions on the inside cover page
(Page i) of this Operating Manual.
1. Daily check list:
A. Oil level (top off as needed)
B. Engine coolant level (top off as needed)
C. Diesel fuel level in fuel tank
D. Tap dirt out of air intake housing and check for excessive dirt
E. Clean debris off radiator
Consult the supplied HATZ Engine Service Manual, the MURPHY Electronic Control Panel
Manual and the Service Manual of the PTO Manufacturer, such as WPT Power or NACD.
2. Periodic Maintenance (See Page 25 for More Details)
A. Change oil and oil filter
B. Clean/replace fuel filters as needed
C. Clean and inspect air filter and replace as needed
D. Grease both (inside and outside) fan bearings every 2 - 4 months
(Do NOT over-grease)
E. Adjust and grease PTO per supplied PTO Service Manual
F. Inspect adjustment of coupler hubs and realign by re-adjusting the engine
isolators (motor mounts) as needed
G. Check alternator V-belt and adjust as needed
Contact Air Burners, Inc., should you require assistance with any of these
necessary maintenance tasks. Send Email to support@airburners.com,
The engine does not require DEF.
call 772-220-7303 or 888-566-3900
(Customer Support)
Page 23 of 26
(Vers.12.17.2018)