Advertisement
DELTALA Installation
and the white wire to the box.
In all cases, it is the electrical insulation that is to be protected. Once in the circuit, the high
voltage ruptures the insulation of the equipment in its effort to discharge to ground. The
arrestor provides a parallel path to ground for the current discharge. Consequently, the black
wires need to be connected to the circuit, and the white wires need to be connected to the
metal frame of the machine or device to be protected. A mere ground connection will not
necessarily provide protection; however, it should be used in addition to the frame
connection.
Delta Lightning Arrestors guarantees and warrants to the end user that this arrestor is free
from defects in workmanship and material. The arrestor is designed to conduct 60,000 amps
of lightning or surge to ground without damage. When lightning or surge is in excess of
60,000 amps, the arrestor is expected to experience damage. In the event the arrestor
should damage due to defects, return it to the factory with payment of five dollars to cover
shipping and handling and it will be replaced. This guarantee is limited to replacement.
There is no other warranty, expressed or implied.
INSTALLATION INSTRUCTIONS: LA302R, LA302,CA302R
The arrestor remains good and functions properly as long as its enclosure is intact. Should
the arrestor ever be damaged the enclosure will burst. While it is not possible to achieve one
hundred percent protection, the Delta Arrestor will greatly reduce problems due to lightning
and power surge. This device is to be installed in accordance with all applicable
requirements of the National Electrical Code.
2 of 7
GUARANTEE
Caution! Electrical work can be dangerous and
should only be attempted by persons experienced
to do so. Accidental contact with electrically
charged parts can cause injury or electrocution.
Loose connections can cause over heating,
damage to equipment, and fire.
http://www.deltala.com/installa.htm
10/24/2007 9:23 AM
Advertisement
