Perfomance Tool W89730 Owner's Manual

A/c manifold gauge set

Advertisement

Quick Links

A/C Manifold Gauge Set
Stock Number W89730
WARNING: USE ONLY R-134A REFRIGERANT
WITH THE A/C MANIFOLD GAUGE SET
WARNING
TO PREVENT EXPLOSION, SERIOUS IN-
JURY, AND DEATH:
• Service of air conditioning systems must be
done only by trained and experienced techni-
cian to avoid overfilling.
• Technicians opening refrigeration circuit in
automotive air conditioning systems MUST be
certified in refrigerant recovery and recycling
procedures in compliance with section 609 of
Clean Air Act Amendments of 1990.
For additional information regarding ozone
depletion and air conditioning service regula-
tions, visit EPA's website: www.epa.gov/ozone
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights.
Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and
remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A defective prod-
uct may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to place of purchase immedi-
ately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts
which our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a sales receipt showing the date of
purchase accompanies the defective product or defective part (s) being returned. For part (s) after 90 days, please remit your request, postage prepaid
to: PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use and
service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been repaired or
altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any product or part which has been subject
to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied warranties of
any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no implied warranty of
fitness for any particular purpose, except that for goods purchased primarily for personal, family or household use and not for commercial or business
use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied warranty of fitness for a particu-
lar purpose), but only for the particular qualities or characteristics, and for the duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product, or
to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the repair, or replacement
thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the
above limitations may not apply in all cases.
© Copyright 2012 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
OWNER'S MANUAL
LIMITED WARRANTY
IMPORTANT SAFETY INSTRUCTIONS,
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions detailed in this manual may result in
serious personal injury.
SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for Perfomance Tool W89730

  • Page 1 A/C Manifold Gauge Set Stock Number W89730 OWNER'S MANUAL WARNING: USE ONLY R-134A REFRIGERANT WITH THE A/C MANIFOLD GAUGE SET WARNING TO PREVENT EXPLOSION, SERIOUS IN- JURY, AND DEATH: • Service of air conditioning systems must be done only by trained and experienced techni- cian to avoid overfilling.
  • Page 2: Product Specifications

    PRODUCT SPECIFICATIONS SAVE THESE Blue (Low) Gauge 0-120psi INSTRUCTIONS Blue Hose ¼ in. FFL x 50 in. 13. Industrial applications must follow OSHA requirements. Red (High) Gauge 0-500psi 14. People with pacemakers should consult their Red Hose ¼ in. FFL x 50 in. physician(s) before using this product.
  • Page 3: Components And Functions

    APPLICATIONS 1. The Red HP Gauge (3) is used to measure high pressure compressor discharge side pressure. 2. The Blue LP Gauge (5) is used to measure low-pressure side suction or pressure. 3. The Manifold Valves (11) control the flow of refrigerant to and from the Yellow Hose (18), also called the Charge Hose. 4.
  • Page 4: Operation

    OPERATION Read the ENTIRE SAFETY WARNINGS Note: Throughout this manual: section at the beginning of this manual HP means High-pressure before set up or use of this product. LP means Low-pressure CWmeans Clockwise WARNING CCW means Counterclockwise TO PREVENT EXPLOSION, SERIOUS Note: Procedures such as charging INJURY, AND DEATH:Service of air con- refrigerant through the HP side of...
  • Page 5: Connect Hoses

    WARNING 3. Use in well-ventilated area only. 4. Keep gauge and hoses away from moving To prevent SERIOUS INJURY and DEATH: engine parts. 1. Wear ANSI-approved safety goggles and 5. Turn off vehicle’s engine and A/C system heavy-duty work gloves during setup and use. before attaching gauge.
  • Page 6 WARNING 3. Use in well-ventilated area only. 4. Keep gauge and hoses away from moving To prevent SERIOUS INJURY and DEATH: engine parts. 1. Wear ANSI-approved safety goggles and 5. Turn off vehicle’s engine and A/C system heavy-duty work gloves during setup and use. before attaching gauge.
  • Page 7 WARNING 3. Use in well-ventilated area only. 4. Keep gauge and hoses away from moving To prevent SERIOUS INJURY and DEATH: engine parts. 1. Wear ANSI-approved safety goggles and 5. Turn off vehicle’s engine and A/C system be- heavy-duty work gloves during setup and use. fore attaching gauge.
  • Page 8: Inspection, Maintenance And Cleaning

    INSPECTION, MAINTENANCE AND CLEANING WARNING any other condition that may affect safe operation. If a problem with the Set occurs, have it corrected before further use. Do not use damaged equipment. TO PREVENT SERIOUS INJURY FROM TOOL FAIL- URE: Do not use damaged equipment. If abnormal Periodically, clean with a damp cloth using a mild noise, vibration, or leaking air occurs, have the prob- detergent or solvent.

Table of Contents