Paul Mitchell Express Ion Dry+ D15NA Instructions, Safety And Warranty Manual

INSTRUCTIONS, SAFETY AND WARRANTY GUIDE
Congratulations on the purchase of your Express Ion Dry
We hope you enjoy it for years to come!
• Please make sure to read this guide thoroughly before use.
• Please keep this guide in a handy place for quick reference.
Digital LCD screen– Heat, airflow, and cool shot settings displayed.
Reduces drying time– Unique Express Ion Complex
and quickly from the inside out, leaving hair hydrated, conditioned,
and frizz-free.
Easy styling– Smoothes and seals the cuticle, while gentle air flow
results in less tangles, flyaways, and damage.
• Digital display shows heat and speed settings
• Easy-snap filter
• 5 temperatures/5 speed settings
• 1875 watts professional DC motor
• Ergonomic handle
• Express Ion Complex
• Cool shot button
• Ionic styling nozzle and diffuser
• 9-foot professional cord with hanging loop
This dryer is intended for professional and consumer use. This dryer
has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit into a polarized outlet only one way. If the plug
does not fit securely, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
Model: D15NA
Rated Voltage: 125V
Frequency (Hz): 60Hz
Rated Wattage: 1875W
Length of A.C. Cord: 9 ft./2.7 m
Weight: 20 oz. (1.25 lbs.)/570 g
Accessory: Nozzle and diffuser
The dryer is virtually maintenance-free. No lubrication is needed.
Unplug the dryer from the power source prior to any maintenance.
Keep all vents and openings clear of dirt and dust. The exterior of
the dryer should be wiped clean with a damp cloth only. The air filter
cover, at the rear of the dryer, should be removed and the area cleaned
of any hair or dust. There is an air filter underneath the air filter cover
that should also be washed and cleaned every couple of weeks so hair
doesn't catch in the fan. To keep the dryer clean, unplug the dryer from
the power source, remove the mesh filter, and wash the mesh filter with
soap and water every 30 days.
If overheating occurs, an automatic safety device will trip off and the
cool air will come out of the dryer for a period of time. Then the hot
air will come out again after the automatic safety device resets itself.
If this occurs, unplug the cord and allow the dryer to cool for 10 to 15
minutes. Make sure the air vents and removable mesh filter are fully
cleaned before starting again. For easy cleaning, simply twist the filter
cap open to remove the mesh filter, and wash with soap and warm
water. Let the mesh filter dry completely before inserting it back into
position, then twist the filter cap to the lock position.
Defects and Malfunction
• Read all contents of the warranty completely and carefully
before contacting the salon, the distributor, or our Paul Mitchell
Pro Tools
™
• The dryer is covered under warranty for 12 months from the date
of purchase.
KEY BENEFITS
™ helps hydrate and restore moisture
OPERATING INSTRUCTIONS
GENERAL SPECIFICATIONS
MAINTENANCE
OVERHEATING
Warranty Center.
FEATURES
+ blow-dryer.
®
™ dries hair gently
®