TITA THINK TT531WN-PRO Quick Installation Manual

1.Packing List

Open the package, then make sure the TT531WN-PRO smart
clock (device) is intact, and with all the below accessories.
Quick Installation Guide
1 x Smart clock 1 x USB Cable
Clock Camera
Smart Clock Camera
TT531WN-PRO
1 x Quick Installation Guide 1x Rechargeable Lithium Battery
5V
1 x Adapter

2.Preparation

3.Operation Instruction, please read, IMPORTANT!
Please prepare the below stuffs before you use it.
One smartphone or tablet PC(Mac or Windows PC is not
acceptable) with IOS 6.0 or Android 4.0 system(higher
version system is acceptable)
Android phone iPad iPhone
1 Open the back cover. 2 Take out the battery.
Wi-Fi Router
Device only can connect to 2.4Ghz Wi-Fi router.
2.4G Wi-Fi
Make sure turn on the DHCP of router, and MAC address should be off.
Distance between router and smart clock should be within 5
mtrs during the configuration. 4
Plug in.
2.4G Wi-Fi
Please don't use special character such as Chinese,
symbol to name the WiFi.
Please don't use special character such as Chinese,
symbol as the password for the WiFi and Wi-Fi
password can not be none.
Wi-Fi Router
Install"Lizive" App
Warning
Search "Lizvie" App from Apple Store or Google Player, then download.
Don't use the battery to active the device before
Scan the QR Code below and install the App.
recharged enough.
The battery needs charge for 5 hours.
The device can work 2-3 hours when the battery is fully
charged.
Please remove the adapter in thunderstorm to avoid the
IOS Android possible damage.

4.Configure Device

Open the App of Lizvie.
AT&T 11:57 AM
My Cameras
Smart Clock
Model: TT531WN-PRO
Input: 5V 2000mA
User/PW: admin/admin
Made in China
1
Click " ".
3
Please remove the sleeves and put the
battery back. Don't reverse the + and -. Add Camera
Make sure your smart phone is connected to
router before the configuration.
AT&T 11:57 AM
Add Camera
First Add
2 Click First Add.
5
Please switch it from off to on.
Smart Clock
Model: TT531WN-PRO
Input: 5V 2000mA
User/PW: admin/admin
Made in China
6 Wait for 60 seconds after plug in, the device
is active when you hearing 3 sounds of Dong.
3 When you heard 3 sounds of Dong, please
click Next.
AT&T 11:57 AM AT&T 11:57 AM
Warning
First Strep Camera Information
If no sounds, please switch off and turn on the
342E78GX54AGE67H111A
device again.
Plug in and turn on the device,you will hear a
sound when the device is active
Camera Name cannot be empty
If still no sounds, please press "RESET" button
Next
at the backside, and hold it for 5 seconds, the 5 Name the device.
device go back to default when you hear Ding.
Wait for 60 seconds, the device will restart.
NO Sound
Next
AT&T 11:57 AM
WiFi Passord
AT&T 11:57 AM AT&T 11:57 AM
Scan QR Code Light 第四步 WiFi密码
4 Scan the QR code on the sticker of the back
Don't use the Chinese or special symbol
Scan the QR code (Note:Open the back Test1
cover, QR Code is at the backside of the housing. to name the WiFi.
housing) Test1
WiFi Password
WiFi密码
Don't use the Chinese or special symbol to
开始配置 Configuration
name the WiFi.
Cannot scan QR code?
How to find the camera ID?
6 Input the right password of the Wi-Fi.
AT&T 11:57 AM
Connect WiFi
7 Please put your smart phone or tablet PC to
Turn your smartphone to the device within 10cm, then press to
maximum volume...
configuration.
Press to send
acoustic wave
Within 10 CM
Turn the volume of smart-phone or
tablet PC to maximum.
Titathink, we are standby for your any use question.
AT&T 11:57 AM
Configuration
www.titathink.com support@titathink.com
8 Wait for 60 seconds, the configuration will be
done.
100%
If configuration failed
Completed
Please make sure input right password(check the
capital&small letter,blank)
Finish
Keep the environment is quite when do the
configuration.
REV1.1.1