Summary of Contents for CLP Beta-Pette B8.200
- Page 1 M U L T I C H A N N E L 5648 Copley Drive San Diego, CA 92111 Phone 1-800-456-7741...
- Page 2 M U L T I C H A N N E L...
- Page 3 M U L T I C H A N N E L...
-
Page 4: Table Of Contents
The specifications for accuracy and precision given in the following table are obtained using CONTENTS CLP tips. These figures are only guaranteed 1 - INTRODUCTION when CLP tips are used. 2 - VOLUME SETTING channel... -
Page 5: Method Of Pipetting
M U L T I C H A N N E L Next, still holding the pipette vertically, the ope- 2 - SETTING THE VOLUME rator should press the pipetting button until the In order to set the volume of the dose to be deli- first resistance point is felt, and immerse the tips vered, the calibration knob with counter is used. -
Page 6: Recalibration
CLP pipettes are calibrated by gravimetric met- Recalibration procedure: hod, using CLP tips and distilled water, at the • Set the dose volume depending on the pipette temperature 20±1°C, according to DIN 12650. volume according to the following table: If during pipette operation you find that the Volume change ∆V for... -
Page 7: Maintenance
M U L T I C H A N N E L If the average aspirated volume exceeds the Accessories permissible value, the following should be done: Pipettor Tip Choices • Remove the pipetting pushbutton, (Fig. 4A), 2342 10 µl, XL, 10 racks of 96 2040 10µl, 10 racks of 96 •...
Need help?
Do you have a question about the Beta-Pette B8.200 and is the answer not in the manual?
Questions and answers