AXESS ELECTRONICS MFC5 Manual

Power Requirements

~ ~
75mA@9VAC (5.5mm/2.1mm Barrel Connector)
!!WARNING!! NEVER USE PHANTOM POWER AND
THE POWER JACK AT THE SAME
TIME, IT CAN DAMAGE THE MFC5 AND
THE DEVICE IT'S CONNECTED TOO.

MIDI Implementation

Model: MFC5
Firmware: Version 2
Revision 1
MIDI Channel: Default: 1
(Transmitted) Changed: 1 - 16
Control Change: 0 - 127 Up to eight Control
(Transmitted) Change messages can
be transmitted per preset.
Control Value 0 = Off
Control Value 127 = On
Program Change: 1 - 128 Up to two Program
(Transmitted) Change messages can
be transmitted per preset.
Actual Program Change
value sent is 0 - 127.
Notes: 1. All user data including; MIDI Channels,
Control Change Numbers, Control Change
Status and Program Change Numbers are
stored in Non-Volatile EEPROM memory.
2. The factory default for Control Changes
and Program Changes is none sent (---),
on MIDI Channel 1.
Noise & Interference
Some WAH pedals are sensitive to clock signals
generated by digital circuits such as those found in
MIDI footcontrollers. In the case of our MFC5, we have
found that if such interference occurs, it can easily be
corrected by (1) moving the MFC5 a couple of inches
away from sensitive WAH pedals or (2) re-locating the
MFC5 elsewhere on the pedalboard.

Warranty

This product is warranted against failures due to
defective parts or faulty workmanship for a period of
one year after delivery to the original owner. During this
one year period, Axess Electronics will make any
necessary repairs without charge for parts and labor.
However, shipping charges to and from the repair
location must be paid by the owner.
This warranty applies only to the original owner and is
not transferable.
This warranty does not cover damage to the product as
a result from accident or misuse.
This warranty will be canceled at the sole discretion of
Axess Electronics if the product has:
1. Any signs of tampering, unauthorized service, or
modifications.
2. Any damage resulting from physical abuse or failure
to follow the operating instructions.
Axess Electronics' liability to the owner and under this
warranty is limited only to the repair or replacement of
the defective product. Call or write to Axess Electronics
prior to shipping the product for repair.
Axess Electronics reserves the right to make any
changes and/or improvements to the design of this
product without any obligation to include those changes
in any previously manufactured units.

How To Reach Us

Mail: Axess Electronics
251 Queen Street South #278
Mississauga, Ontario L5M-1L7
Canada
Tel.: 416-410-9688
Website: http://www.axess-electronics.com
MFC5
MIDI Footcontroller
•
The MFC5 MIDI Footcontroller is a compact,
rugged, simple to use, fully programmable
MIDI footcontroller.
• 82 presets are arranged into 27 banks of 3
presets, and 1 global preset which is common
to all banks.
•
Each preset can transmit 8 MIDI Control
Changes on a single MIDI Channel and any 2
MIDI Program Changes on 2 MIDI Channels.
• Capable of controlling two or more (with MIDI
mapping) rack effects and eight loops and/or
control functions on most
switchers.
• All User Data is stored in Non-Volatile
EEPROM memory.
• A large three-character
display allows for easy viewing of the bank
number and editing data on any stage.
•
Five long-lasting, heavy-duty Carling stomp
switches (the real ones...) offer a positive
tactile feel.
•
Powered by a 9VAC Adapter
5.5mm/2.1mm barrel connector or through a
5-pin MIDI cable.
• Housed in a compact (7.50"W x 4.75"D x
1.25"FH x 2.00"RH) and rugged .094" thick
aluminum enclosure for years of reliable use
and performance.
•
Brushed finish with black anodize coating and
laser-engraved printing.
commercial
seven-segment
with a