1. Manuals
  2. Brands
  3. Sens Manuals
  4. Headsets
  5. SM1P
  6. Manual

Sens SM1P Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL
ENGLISH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SM1P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sens SM1P

  • Page 1 MANUAL ENGLISH...
  • Page 2 INTRODUCTION The SM1P is a state of the art hearing protection communication is a state of the art hearing protection communication system that allows you to retain situational awareness whilst system that allows you to retain situational awareness whilst...
  • Page 3 English glis HEADSET ANATOMY DOC00078 SM1P Manual rev 01.5...
  • Page 4 Two-way radio connector (note, these will vary depending radio connector (note, these will vary depending 1.14 on your two-way radio) 1.15 SRCK61XX cable assembly 1.16 To the two-way radio 1.17 LED light (one on each side of headset) DOC00078 SM1P Manual rev 01.5...

  • Page 5: Wearing The Headset

    English glis WEARING THE HEADSET FIGURE 2 Description Headset Boom microphone Inline PTT Two-way radio DOC00078 SM1P Manual rev 01.5...

  • Page 6: Fitting The Headset

    WEARING THE HEADSET The SM1P headset is designed to be worn with the headset sealing around the ears. Specific examples of how to fit the headset around the ears are covered in the next three pages. The fit does alter slightly depending on what style of brace is used - headband, behind the neck or mounted to a helmet directly.
  • Page 7 3.2 The ear muff cushions should seal firmly against the head. 3.3 For best results, remove all hair from under the ear cushion. Noise reduction will be adversely affected by anything that breaks the seal of the ear muff ear cushions. DOC00078 SM1P Manual rev 01.5...
  • Page 8 4.2 Ensure no hair is inside the muff ear cushions. Fit the ear muffs over the ears ensuring a tight fit around the ears. 4.4 Ensure the muff completely surrounds the ears. Press down on the headband to obtain a snug and comfortable fit. DOC00078 SM1P Manual rev 01.5...
  • Page 9 Three adhesive mounts and ties are included to secure the ear muff cable to the helmet. The mounts should be evenly spaced around the rear outside of the helmet. Fit the tie through the mount. The cable should feed through each tie and secured in place. DOC00078 SM1P Manual rev 01.5...

  • Page 10: Operating The Headset

    ‘Quiet mode’. Quiet mode only allows two-way radio communications to pass through way radio communications to pass through the headset. mode Green LED, blink twice every 4 seconds Green LED, blink twice every 4 seconds DOC00078 SM1P Manual rev 01.5...

  • Page 11: Setup Mode

    While holding Volume Up, Press & release Power button While holding Volume Up, Press & release Power button Will hear “system setup” Release Volume Up button Cycle down through system setup options down through system setup options (short) DOC00078 SM1P Manual rev 01.5...
  • Page 12 FCC-15.239 / 0.012 88.1 – – 97.0 IC RSS-210 Changing Short Range frequencies: Ensure you hear “short Ensure you hear “short range FM frequency”. Change frequency: (short) up = increment 0.1MHz, down = decrement 0.1MHz DOC00078 SM1P Manual rev 01.5...
  • Page 13 “low”, “medium” and (short) “high” trigger levels “low” is the most sensitive/easiest to trigger VOX and “high” is the “low” is the most sensitive/easiest to trigger VOX and “high” is the least sensitive/hardest to trigger VOX. DOC00078 SM1P Manual rev 01.5...
  • Page 14 Increment/decrement preset frequency bank (long) When the headset is powered off it remembers the last selected hen the headset is powered off it remembers the last selected frequency bank and the Short Range on/off state. DOC00078 SM1P Manual rev 01.5...
  • Page 15 Note, FM radio cannot be turned on while Short Range is turned on Note, FM radio cannot be turned on while Short Range is turned on and vice versa. When on: Scan up/down to the next FM radio. Scan up/down to the next FM radio. (long) DOC00078 SM1P Manual rev 01.5...
  • Page 16 Answer call: From handset Press and release MFB Reject call: From handset Press and hold Multi-function button During call End call: From handset Press and hold Multi-function button Call hung up on the far end DOC00078 SM1P Manual rev 01.5...

  • Page 17: Maintenance And Storage

    Cushions can be removed simply by gripping the cushion and pulling firmly to unclip from the baseplate. Replacement cushions may be pushed into the clips around the Replacement cushions may be pushed into the clips around the baseplate. DOC00078 SM1P Manual rev 01.5...

  • Page 18: Accessories And Spare Parts

    Sensear web site, or by emailing or writing to the address on this User Manual. CHARGING The Sensear SM1P headset is supplied with an AC adapter that operates globally when fitted with the appropriate electrical regional adapter.
  • Page 19 Plug the Sensear AC adapter into an appropriate power outlet. Insert the cable end of the Sensear AC adapter into the DC power socket on the SM1P headset. The LEDs will flash as indicated below: Red LED blink twice every 5 seconds Battery low (<...

  • Page 20: Declaration Of Conformity

    Country Australia Telephone +61 8 9277 7332 Number Fax Number +61 8 9277 7338 http://www.sensear.com Email info@sensear.com Declare that: Model SM1P in accordance with the following directives:  2011/65/EU  1989/686/EEC  2014/53/EC  2014/35/EU  2014/30/EU Has been designed and manufactured to the following specifications: ...
  • Page 21 English glis  EN 301 357-1: V1.4.1  EN 60950-1:2006 inc amendments A1, A2, A11, A12 DOC00078 SM1P Manual rev 01.5...

Table of Contents