Table of Contents
Advertisement
Quick Links
MOUNTINg TEMPlATE
2
EL510-35PLUS
SSI0312
₁₆
"
/ 71.4mm
¹³⁄
₁₆
"
/ 4.8mm
³⁄
₈
"
/ 4.8mm
⁵
⁄
15
16355 South Lone eLm road
oLathe, KanSaS 66062 • uSa
Phone: 913-829-1000
Toll Free: 800-255-4109
•
www.smhco.com
PROGRAMMABLE CODE SWITCH
Printed in USA
Fax: 913-829-9208
•
OPERATION INSTRUCTIONS
Read and Save
16355 South Lone eLm road
oLathe, KanSaS 66062 • uSa
Phone: 913-829-1000
Toll Free: 800-255-4109
•
www.smhco.com
Fax: 913-829-9208
•
Advertisement
Table of Contents
Summary of Contents for TVH EL510-35PLUS
-
Page 1: Operation Instructions
/ 4.8mm Read and Save ³⁄ ₈ " / 4.8mm ⁵ ⁄ EL510-35PLUS SSI0312 Printed in USA 16355 South Lone eLm road 16355 South Lone eLm road oLathe, KanSaS 66062 • uSa oLathe, KanSaS 66062 • uSa Phone: 913-829-1000 Toll Free: 800-255-4109... -
Page 2: Specifications
instruction Booklet FEATURES: with reset Code and Quick reference The PSL+ ™ Programmable Security Lock is an enhanced version of the PSL ™ product with several additional features. Like the original, this version is primarily designed for use with both battery and I.C. -
Page 3: Warranty Note
optional unit Worksheet WARRANTy NOTE The PSL+ is a sealed unit. There are no user serviceable parts inside. Removing or tampering with Supervisor Code: Reset Code: the epoxy encapsulant will void the warranty. User # Code Name/Group User # Code Name/Group I. -
Page 4: Supervisor Mode
III. SUPERvISOR MOdE: WIRINg ANd INSTAllATION (CONTINUEd) Using external relay for high Current load with no activity Monitoring This mode is used to program user codes and set up advanced functions of the PSL+. From this mode each key initiates a specific configuration procedure or function in the supervisor menu. These options are explained one by one in the following sections and listed in the table below. - Page 5 WIRINg ANd INSTAllATION: Otherwise, the unit will sound four short beeps to indicate the last user information is coming followed by a series of flashes of the red and/or amber LEDs. Each red flash counts as 10 and The PSL+ utilizes the same basic package as the original PSL product and may be mounted with each amber flash counts as one.
-
Page 6: User Operation
v. USER OPERATION: Function 4 – aSo delay time Previously programmed users may activate the output of the PSL+ by following the three-step The “4” key initiates a procedure to set how long the Automatic Shut Off (ASO) function will wait procedure below. - Page 7 Step 1: The unit will indicate entry into this procedure by repeating a display cycle that consists Function 6 - maintenance Cycle activation Control of 2 amber flashes, 1 red flash, 1 amber flash and a pause. If the signal you are monitoring The “6”...
- Page 8 Function 8 – maintenance reminder Frequency Quick Steps – Function 9 The “8” key initiates a procedure to set how often the unit will sound the reminder sequence 1. Press 9. Unit will indicate Function 9 mode active. (5 short beeps) if the maintenance cycle has expired and the output is on. Entry into this mode is 2.
Need help?
Do you have a question about the EL510-35PLUS and is the answer not in the manual?
Questions and answers