ASTRALVISION TSLEDMOB2 Installation Instructions

ASTRALVISION TSLEDMOB2
Touchscreen Mobile Stand

Installation Instructions

The ASTRALVISION TSLEDMOB2 Mobile S tand incorporates a Universal W all Mount, and is
designed to suit the ASTRALVISION Touchscreen LED TV range. The mount provided is
designed to suit this stand; all holes are pre-drilled and checked, so assembly should be easy
& simple.
Parts Listing: This stand is rated to carry 1 10kgs; Parts List and instructions are as follows:
Box 1:
Number Part
1 Base Plate
2 Metal Shelf
3 Black Metal Flat Base Brackets
4 Black Metal 3-sided Base Brackets
5 Black Melamine panels
6 Pack of Velcro
7 Padded bag of screws & allen keys
Box 2:
1 Main uprights (approx 1.48m long)
2 Cross bars (approx 0.52m long)
3 Castors (2 locking; 4 free wheeling)
4 Black right angle shelf brackets
Bag of Bolts, black, for stand:
# M8 50mm bolts
# M8 25mm bolts
# M5 10mm bolts
# M3 10mm bolts
# M8 washers
# M8 nuts
# Allen Keys, 2 sizes
Bag of Bolts, silver, for Mount:
# M8 75mm bolts
# M8 flat washers
# M8 spring washers
# M8 nuts
NOTE: You will need a 13mm sp anner to tighten the castors & a phillip s head screwdriver.
1. Attach the 6 Castors to the Base: Place the base
on the floor (top down). Remove the 6 silver bolts with
your 13mm spanner (see Pic 2). Put the 2 lockable
castors in the front corners of the base (on long edge
away from holes drilled through the base panel), using
black washers provided between the castor plate and
the stand base cross member. Attach the 4 remaining
castors in the other positions using the washers as
above. Tighten with your 13mm sp anner. The lockable
castors can be used to stop the stand from moving
while in use.
Qty
1
1
2
2
2
1
1
2
2
6
2
10
24
6
4
28
2
4
4
4
4
Front of base
Pic 2