Summary of Contents for littlehippo Kelvin
- Page 1 KELVIN Color Changing Night Light, Room Thermometer and Hygrometer SETUP GUIDE 1 Year Limited Warranty support@littlehippo.com 650-395-7884 littlehippo.com...
-
Page 2: Table Of Contents
CONGRATULATIONS on your purchase of KELVIN, the all-in-one room monitor to help give you peace of mind! MEET KELVIN IN THE BOX SETUP AND MAINTENANCE DISPLAY CONTROL PANEL TEMPERATURE TOGGLE NIGHT LIGHT TOGGLE INFANT SAFER SLEEP INFORMATION TEMPERATURE RANGE SAFER SLEEP GUIDELINES... -
Page 3: Meet Kelvin
Each Little Hippo purchase comes KELVIN is also a night light that with a 100% Satisfaction Guarantee changes color based on the room and one year warranty. Contact support@littlehippo.com for support, temperature. -
Page 4: Setup And Maintenance
100V-240V household outlet. STORE KELVIN should be left on display, or stored in its box or a cool, dry place. Avoid putting KELVIN over or close to heat sources (such as a radiator) or in direct sunlight, for safety and accuracy reasons. -
Page 5: Control Panel
CONTROL PANEL To program all settings, use the control panel on the bottom of KELVIN (Fig. 3). Sensor Opening LED On/Off Fahrenheit/ Celsius Toggle Rubber Feet Fig. 3 Control Panel TEMPERATURE TOGGLE When KELVIN is first plugged in, the display will read in Fahrenheit. -
Page 6: Night Light Toggle
NIGHT LIGHT TOGGLE When KELVIN is first plugged in, the color changing night light will turn on. To toggle the night light on or off, press the LED button on the base of the device (Fig. 5). Fig. 5 LED Button INFANT SAFER SLEEP INFORMATION Sleep experts advise to keep a baby’s... -
Page 7: Temperature Range
Be sure to check your TEMPERATURE RANGE KELVIN will display one of three colors depending on what the room temperature is. If the temperature displays a blue or red light, take steps to heat or cool your baby’s room, respectively. - Page 8 CUSTOMIZE THE AMBER RANGE Hold down the F/C button for 2 seconds to enter Set Temperature mode. When setting for the first time, KELVIN will display the temperature icon and the lowest temperature in the default amber range - 68° F (20°...
- Page 9 Refer to the following tables for the allowable custom amber ranges. Cells highlighted in green are lower bound temperature options you may select. KELVIN’s default settings are highlighted in yellow. Acceptable Range Too Cold Too Hot Display Setting Upper Lower Bound Bound Blue (°...
- Page 10 Acceptable Range Too Cold Too Hot Display Setting Upper Lower Bound Bound Blue (° C) Red (° C) Amber (° C) Amber (° C) ≤ 15 ≥ 19 ≤ 16 ≥ 20 ≤ 17 ≥ 21 ≤ 18 ≥ 22 ≤...
-
Page 11: Safer Sleep Guidelines
SAFER SLEEP GUIDELINES In 2016, the American Academy of Pediatrics (AAP) released updated recommendations for creating a safer infant sleeping environment and to reduce the risk of SIDS and other sleep-related infant deaths. Their recommendations include but are not limited to: Infants should always be placed Consider using a pacifier during for sleep entirely on their backs... -
Page 12: Humidity Guidelines
Refer to the policy statement released by the AAP entitled “SIDS and Other Sleep-Related Infant Deaths: Updated 2016 Recommendations for a Safe Infant Sleeping Environment” for the latest guidelines. Always consult your doctor before settling on conditions in your baby’s room and if you have any questions or concerns. -
Page 13: One Year Warranty
Output Voltage: DC 5V KELVIN. For accurate readings, keep OPERATING TEMPERATURE RANGE KELVIN on a solid surface away from heat sources (such as a radiator or (32F-104F, +/- 2F) sunlight) and avoid holding KELVIN in (0-40C, +/- 1.5C) your hand. -
Page 14: Important Safety Information
• Keep KELVIN away from heat sources such as stoves, radiators and other devices emitting heat. • Keep KELVIN out of reach of your child’s crib or bed, and ensure that the cable cannot be pulled out by a child. -
Page 15: Fcc Disclaimer
FCC DISCLAIMER This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 16 We stand behind our 100% Satisfaction Guarantee. Visit littlehippo.com for more information. We stand behind our 100% Satisfaction Guarantee and one year warranty. Visit littlehippo.com for more information. Note: Due to production changes and improvements, actual product may Note vary slightly from images shown in manual and/or on packaging.