Advertisement
Quick Links
2. Using 1-1/8" socket, remove two (2) existing
bolts and nuts from shock mount bar on the
driver's side.
4. Install solenoid end of TruCenter to back of
anchor bracket with a 3/4"-10 x 6" bolt, 3/4"
fl at washer and 3/4"-10 whiz nut, torque to
180 ft/lbs.
405-00164 Rev. C
Installation Instructions
TC6011 Bracket Kit
3. Install the anchor bracket on the shock mount
bar on the driver's side using the existing
bolts and nuts. Tighten to manufacturers
specs.
5. On the passenger's side, install the tie rod
bracket using the appropriate U-Bolts for your
application. DO NOT TIGHTEN. The tie rod
bracket may be rotated to insure steering
control remains parallel to the ground.
Page 1 of 3
3/18/14
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Blue Ox TC6011
Summary of Contents for Blue Ox TC6011
-
Page 1: Installation Instructions
Installation Instructions TC6011 Bracket Kit 2. Using 1-1/8" socket, remove two (2) existing 3. Install the anchor bracket on the shock mount bolts and nuts from shock mount bar on the bar on the driver's side using the existing driver's side. - Page 2 Product Safety Policy Statement It is, and shall continue to be, a primary objective of Blue Ox Towing Products to provide customers with safe and reli- able products. Blue Ox will, and has, established safety procedures in product design, manufacture, promotion and sales;...
- Page 3 If a bolt is lost or in need of replacement, for your safety and the preservation of your bracket kit, be sure to use a replacement bolt of the same grade. Repair parts may be ordered through your nearest Blue Ox dealer or distributor. © 2012 Blue Ox...
Need help?
Do you have a question about the TC6011 and is the answer not in the manual?
Questions and answers