DU-HA 10026 Installation Instructions

99-07 Chevrolet LS & GMC SLE Regular Cab (Classic)
Behind-the-Seat Storage
Installation Instructions:
Tilt the seat(s) forward.
1
Remove the plastic wing nut from the current plastic jack cover, behind the seat.
2
Thread the metal D022505 extension coupler (included) onto the shaft in the current
3
plastic jack cover.
Place the DU-HA on top of the current plastic jack cover with the DU-HA lettering facing
4
forward, making sure to line up the hole in the DU-HA with the hole in the jack cover.
Place the included washer on top of the hole in the DU-HA, then screw the wing nut
5
onto the metal D022505 extension coupler. Tighten until snug. Do not over tighten.
If desired, install the foam organizer/gun racks with the plastic stiffeners by bending and
6
snapping them into the channel slots in the DU-HA (as pictured). Gun racks can be
installed to hold two guns or one gun depending on how you install them.
You may also use a bungee cord or other type of strap to secure guns in the DU-HA by
threading the bungees or straps through the slots in the top of the DU-HA.

Safety Instructions:

Warning: Seat back must be up and latched at all times while vehicle is moving. Make sure the
DU-HA is secured in the vehicle according to installation instructions. Do not store explosives
or hazardous materials in the DU-HA. Do not place loaded guns in the DU-HA. For further
instructions refer to truck owners manual or contact DU-HA, Inc.
Part Description
A DU-HA Storage Unit
B Foam Organizer / Gun Rack
C Plastic Stiffener
D D022505 Extension
Washer 10026/10027
E
F Nylon Strap with Buckle
DU-HA, Inc. // website: www.du-ha.com
Qty
1
2
2
1
1
– 3"
2
// phone: 1.866.306.DUHA (3842)
Installation Instructions
E
D
C
B
// fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537
DIVIDER – 10026
Fits DU-HA Part Numbers
10026
10027
10028
1 2
4
5
6
2 extra straps
F
are included to
secure guns/
gear in place.
A