Maintenance; General Cleaning - Pure Air Essentials Works COOL MIST Important Instructions Manual

Maintenance

Always unplug the unit before servicing in any way.

GENERAL CLEANING

• Inside the base of the unit. Pour excess water out of the unit. Wash out the unit with fresh
water using the cleaning brush and a soft cloth as needed. Do not submerse the base of the
unit into water, or allow water to enter inside the dry air exhaust port of the unit.
• Water tank. Empty water tank. Remove mist nozzle and clean the mist tube with fresh water
and a light brush (bottle cleaning brush is recommended).
• Outer surface of the unit. Wipe the surface of the unit with a soft, damp cloth if needed.
If you notice an accumulation of water during usage, reduce humidity and dry outer surface
with a cloth.
• Ultrasonic Disk. Remove the tank and empty all the water in the base and tank.
Locate the ultrasonic disk on the inner center of the base unit. USE ONLY THE ENCLOSED
CLEANING BRUSH to gently clean disk and remove build up and deposits. No other
cleaning tool should be used. Do not scrub or scrape the ultrasonic disk.
DE-SCALING
• As water types differ and for your health, cleaning or scale removing (if present) may be
required weekly or every other week to optimize unit performance.
If scale becomes difficult to remove with brush:
1. Make a cup of mixture by adding 1 tsp. of white vinegar and 1 tsp. of water.
2. Let solution stand for 5 minutes.
3. Pour the mixture into the base, clean all interior surfaces with a soft cloth or brush to help
remove scale.
5