Menu Options - Field Controls EvenAir TSRC Installation And User Manual

Wireless thermostat controls whole house fan or economizer
Table of Contents

Advertisement

MENU OPTIONS

The MENU key is used by the homeowner or installer to access the following options:
Option
Description
01
Calibrating the Indoor Temperature Sensor
02
Clean the Touch Screen
03
Change the Home Number
The Home Number only needs to be changed if two installations are within 300 feet of one another. The Home Number
selected in the remote control must be the same as the Home Number selected in the EvenAir T32 Thermostat.
01
Calibrate Indoor Temperature
The indoor temperature is factory set to +/- 1F. If you feel the
thermostat temperature is too high or too low, use this option
to change the temperature (calibrate).
Outdoors
Indoors
o
F
Cool
Link
ed
Set To
PM
Econo
Cooling
Menu
OFF
Touch the MENU key to
display Option 01.
02
Clean the Touch Screen
This option disables the touch screen for 10 seconds to enable
the user to clean the touch screen by wiping down with a soft,
damp cloth.
Outdoors
Indoors
o
F
Cool
Option
Linked
Set To
PM
Econo
Cooling
Menu
Menu
OFF
Touch the MENU key
Press the UP key then
until Option 02 is
press ENTER to turn
displayed, indicated
ON the touch screen
by CL. To exit this
cleaning cycle
option, press ENTER.
HOMEOWNER SECTION
Used By
Installer/User
Installer/User
Installer/User
Option
Enter
Menu
Touch the UP or DOWN key to
change the temperature.
Touch ENTER to save the new
temperature or touch the MENU
key to go to the next option.
Enter
The touch screen is
disabled for 10
seconds.
Range
+/-5
OFF or 10 seconds
1 to 8
03
Change the Home Number
The Home Number is used by the ER1 receiving module when
communicating with wireless devices. The Home Number only
needs to be changed if two installations are within 300 feet of
one another.
Outdoors
Indoors
Cool
Linked
Set To
PM
Econo
Cooling
Menu
OFF
Touch the MENU key
until Option 03 is displayed.
The Home Number only needs to be changed if two
installations are within 300 feet of one another. The Home
Number selected in the remote control must be the same as
the Home Number selected in the EvenAir T32 Thermostat.
Change Batteries
Install 2 AA batteries.
page 5 of 8
Default
As Installed
NA
NA
OFF
NA
1
o
F
Option
Menu
Enter
Touch the UP or DOWN key to
set a new Home Number, then
press ENTER.
P/N 780101745 3/18 Rev A

Advertisement

Table of Contents
loading

Table of Contents