Request IMC Quick Start Manual

Configuring Your IMC for use with an F.Series or iQ

1
Connect your system
according to any of
the wiring guides on
the other side of this
guide.
5
Move your cursor down
to the "ReQuest Server
IP" Box. Delete 0.0.0.0
and enter your ReQuest
server's IP address using
the onscreen keypad.

Quick Tips

Factory Defaults

To reset your IMC to factory
defaults, aim your remote at the
IMC and click:
then three times.
The unit will reboot and return to
factory defaults.
The default password for parental settings is: 1111
©2008 ReQuest Inc • 100 Saratoga Village Blvd Suite 44 • Ballston Spa, NY 12020 • 800.236.2812 • www.ReQuest.com
IMC Quick Start Guide
Basic instructions for getting your IMC mounted, powered up and configured.
2
Make sure your ReQuest
server is powered on and
connected to the network
before connecting and
powering up the IMC.
6
Click on "Close" then
"Save" and your IMC
will reboot. After
reboot, the IMC will be
configured and ready
for use!

Settings Page

If you find yourself stuck at any
point, you can quickly get back to
the settings page by clicking the
"home" button
on your IMC remote. This will
work from any screen.
3
On first run, the IMC will begin
cycling through video modes,
changing once every 15
seconds. Confirm the mode
that works best with your TV.
7
iQ
On a networked computer,
browse to the iQ system's
Only
webserver and click "iQ
Configuration" in the
bottom menu.

Single Unit Rack Mounting

Attach extended length ears as normal using
screws provided in the chassis.
five times
4
The connected TV will display
a message that the "server
was not found" or "this panel
is not configured". Close this
dialogue to proceed.
8
Click on "Rooms". Once
there, drag the IMC to the
appropriate room with a
speaker and your IMC will
be ready to use!

Screen Resolution

Any time you make a change to
your screen resolution mode, your
IMC will cycle through all modes
(720, 1080i, 1080p, 480p) for 15
seconds at a time until you select
one that works. This prevents the
IMC from getting stuck on the
wrong mode for your TV.