Connecting To Component Video Equipment - Sanyo PLC-XU84 Owner's Manual

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables ✽
• Scart-VGA Cable ✽
• Component Cable ✽
• Component-VGA Cable ✽
(✽ = Not supplied with this projector.)
Audio Output
Audio cable ✽
(stereo)
USB SERVICE PORT
✔Notes:
•When connecting the AUDIO OUT to external audio equipment,
the projector's built-in speaker is disconnected.
•See page 69 for ordering optional cables.
RGB Scart 21- Component Video Output
pin Output (Y, Pb/Cb, Pr/Cr)
Scart-VGA
cable ✽
COMPUTER IN 2
/COMPONENT IN /MONITOR OUT
COMPUTER IN 2
/ COMPONENT IN
COMPUTER IN 1
MONITOR OUT
DVI-I
COMPUTER/
COMPONENT
AUDIO IN
Component
cable✽
Component-VGA
cable✽
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 49.)
(VARIABLE)
AUDIO OUT
R
AUDIO OUT
(stereo)
COMPUTER /
L
VIDEO IN
COMPONENT
(MONO)
S-VIDEO IN
AUDIO IN
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
Installation
External Audio Equipment
Audio Input
Audio cable ✽
(stereo)
19