sunjoe 24V-DD-LTE Operator's Manual

24-volt max | 2.0 ah | tool case

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OPERATOR'S MANUAL

A Division of Snow Joe

, LLC

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

WARNING!

When using the drill/driver basic safety

precautions should always be followed to reduce the risk of

fire, electric shock, and personal injury. These include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

3. Do not operate power tools in explosive atmospheres

– Such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the drill/driver when you are tired,

or under the influence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

3. Avoid unintentional starting – Do not carry the drill/driver

with your finger on the trigger. Make sure the switch is off

before connecting the drill/driver to power source.

4. Do not overreach – Keep proper footing and balance at

all times. Proper footing and balance enable better control

of the cordless drill/driver in unexpected situations.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

, LLC

CORDLESS DRILL/DRIVER

24-VOLT MAX | 2.0 Ah | TOOL CASE

Model 24V-DD-LTE

6. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. – Use of dust collection

can reduce dust-related hazards.

7. Do not use on a ladder or unstable support – Stable

footing on a solid surface enables better control of the

power tool in unexpected situations.

Tool Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Do not use drill/driver if switch does not turn on or off

– The drill/driver that cannot be controlled with the switch

is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or

battery pack from the drill/driver before making any

adjustments, changing accessories, or storing the

drill/driver – Such preventive safety measures reduce risk

of starting the power tool accidentally.

4. Store idle drill/driver out of reach of children or other

untrained persons – Drill/driver is dangerous in the hands

of untrained users.

5. Maintain cordless drill/driver – Check for misalignment

or binding of moving parts, breakage of parts, and any

other condition that may affect the drill/driver's operation.

If damaged, have the drill/driver serviced before using.

Many accidents are caused by poorly maintained tools.

6. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed – Use of the power tool for operations different

from those intended could result in a hazardous situation.

Battery Tool Use and Care

1. Recharge only with the charger specified by the

manufacturer – A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

2. Charge internal battery at ambient temperatures

between 50ºF – 104ºF (10ºC – 40ºF).

3. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes, seek

medical help – Liquid ejected from the battery may cause

irritation or burns.

Form No. SJ-24V-DD-LTE-880E-M

SAVE THESE INSTRUCTIONS

Table of Contents

Summary of Contents for sunjoe 24V-DD-LTE

Page 1 OPERATOR’S MANUAL Model 24V-DD-LTE A Division of Snow Joe , LLC ® Form No. SJ-24V-DD-LTE-880E-M IMPORTANT! 6. If devices are provided for the connection of dust extraction and collection facilities, ensure these are Safety Instructions connected and properly used. – Use of dust collection can reduce dust-related hazards.
Page 2: Battery + Charger Safety Instructions
4. Use power tools only with specifically designated 8. Do not crush, drop or damage battery pack. Do not battery packs – Use of any other battery packs may use a battery pack or charger that has been dropped or received a sharp blow – A damaged battery is subject create a risk of injury and fire.
Page 3 • Maintain charger cord – When unplugging the charger, pull • Store your battery pack and charger in a cool, dry place – Do not store the battery pack or charger where the plug, not the cord, from the receptacle to reduce the temperatures may exceed 105ºF (40.5ºC), such as in direct risk of damage to the electrical plug and cord.
Page 4 13. Under abusive conditions, liquid may be ejected from 8. Never use or charge batteries if you suspect that it has the battery; avoid contact. If contact accidentally occurs, been more than 12 months since the last time they were flush with water.
Page 5: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –...
Page 6: Know Your Cordless Drill/Driver
Know Your Cordless Drill/Driver Read the owner’s manual and safety instructions carefully before operating the cordless drill/driver. Compare the illustration below to the cordless drill/driver in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Page 7: Battery Pack Operation
Unpacking Carton Contents Lights Light Indicators • Cordless drill/driver • Double-ended driver bit Charge level button • 24V iON+ lithium-ion battery The battery is at 30% capacity • 24V iON+ lithium-ion battery quick charger and requires charging • Tool case The battery is at 60% capacity and requires charging soon •...
Page 8: Charging The Battery
Charging the Battery 4. When the charger light turns green, the battery is fully charged (Fig. 3). 1. Push the push lock button on the battery to pull the 5. A fully discharged pack with an internal temperature in battery pack out of the equipment (Fig. 1). the normal range will fully charge in 55 mins (between 32ºF/0ºC and 113ºF/45ºC).
Page 9: Operation
Assembly 3. Raise the front of the drill slightly and insert the double- ended driver bit or drill bit (Fig. 7). NOTE: Drill bit is not included. WARNING! Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use.
Page 10: Selecting The Direction Of Rotation
5. To remove bits, lock the switch trigger and open the chuck 3. The center position locks the tool (Fig. 13). jaws (Fig. 6). 6. The bit provided with the drill can be placed in the storage Direction of Fig. 13 area, located on the base of the drill (Fig.
Page 11: Adjusting Torque
Adjusting Torque 3. To turn the drill ON, depress the trigger switch (Fig. 15). Select the proper torque setting by aligning the adjustment ring Fig. 15 with the indicator arrow to suit the type of material and size of screw you are using (Fig. 17). •...
Page 12 Drilling/Driving Screws Wood + Metal Drilling A level is located on the top of the motor housing to help keep For maximum performance, use high speed steel bits for wood the drill bit level during use (Fig. 19). or metal drilling. Select drilling mode. Begin drilling at a very low speed to prevent the bit from slipping off the starting point.
Page 13: Service & Support
Check with your local authority or retailer for recycling advice. • If your Sun Joe iON+ 24V-DD-LTE cordless drill/driver ® requires service or maintenance, please call the Snow Joe Always dispose of your battery pack according to federal, ®...
Page 14: Optional Accessories
Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this cordless drill/driver. Contact Snow Joe + Sun Joe if you ®...
Page 15 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe + Sun Joe are dedicated to you, our customer. We strive to make your experience as pleasant ® ® as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us.
Page 16 snowjoe.com...