Introduction; Mounting; Hook-Up - TC Electronic CLARITY M User Manual

4
CLARITY M/CLARITY M STEREO User Manual

1. Introduction

Clarity M and Clarity M Stereo
This manual covers two versions: Clarity M and Clarity M Stereo. Clarity M
supports stereo and 5.1 via plug-in and AES. Clarity M Stereo supports stereo
operation only. Most of the features described in this manual apply to both
models, unless otherwise noted in the text.
The Clarity M provides a comprehensive set of precision tools essential to the
success of any audio producer. Ideally suited to stereo and 5.1 mixing, mastering
and post-production, Clarity M's 7" high-resolution LCD display provides a wealth
of monitoring information at-a-glance via a single screen. Metering options
include the legendary LM6 Loudness Radar Meter, a state-of-the-art true peak
meter, vector scope meter, downmix compliance, stereo/surround correlation
meters and an RTA (Real Time Analyzer).
Source inputs come in a vast array of options including: USB for hassle-free VST*,
Audio Units* and AAX* plug-in metering, 6 channels of unbalanced AES3 digital
audio on 75 Ohm BNC connectors for broadcast-grade 5.1 metering, and stereo
optical for maximum flexibility.
Continue through this manual to learn about the functionality and operation of
the Clarity M.

2. Mounting

The Clarity M includes a built-in stand that can be installed during use and then
reverted back to its storage/travel position. Follow these steps to mount the stand:
•
Remove the 2 hex screws that hold the stand flat against the back of the
unit. The screws are designed to be operated with a 2.5 mm hex key.
• Flip the stand around so that it sticks outward from the unit. The stand has
rubber pads to prevent it from scratching the surface where it is placed.
• Replace the screws into the same holes to secure the stand.
RAM Mount
The Clarity M also has 2 holes that are ready to use with any compatible
mount solution. We recommend RAM mounts (www.rammount.com),
but others are also available. These allow convenient attachment to desks or
walls for easy access and ideal viewing. The M5 screws needed for installation are
not included, and vary in length depending on the mounting solution you
purchase. Follow the directions for your mounting solution to install.

3. Hook-up

Plug-in metering - connecting to a computer