Do you have a question about the 411/4909 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Hayward 411/4909
Page 1
Hayward - Left Shelf TV Unit Assembly Instructions - 411/4909 Please keep for future reference 411/5568 Dimensions Width - 38cm Depth - 39cm MADE IN Height - 58.5cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number)
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 31kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3
Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the panels listed below Left Side Right Side...
Page 4
Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
Page 5
Assembly Instructions Step 1 Prepare the left divider Insert 2 large locking Finished nuts into the left front edge divider Note: The arrow on the locking nut must point towards the hole in the edge of the panel Fit 2 hinge plates onto the left divider making sure that the slot...
Page 6
Assembly Instructions Step 3 Prepare the 2 fixed shelves Insert 4 large locking nuts into each of the 2 fixed shelves Finished front edge Step 4 Fit a fixed shelf to the left divider Push a fixed shelf onto the left divider Use a screwdriver to tighten the 2 large locking nuts...
Page 7
Assembly Instructions Step 6 Prepare the base Insert 4 large locking nuts into the base Screw the 4 feet into the mark holes in the base using screws Finished front edge Step 7 Fit the base Attach the base the left divider using 2 screws Finished...
Page 8
Assembly Instructions Step 9 Prepare the left side Finished Screw 6 metal dowels front edge into the left side Insert 2 large locking nuts into the left side Step 10 Prepare the right side Screw 2 metal dowels into the right side Insert 2 large locking nuts into the right...
Page 9
Assembly Instructions Step 12 Prepare the top Screw 8 metal dowels into the top Finished front edge Step 13 Fit the top Note: To make it easier to fit the top, place polystyrene blocks from the packaging underneath the side and divider panels to raise the assembly.
Page 10
Assembly Instructions Step 14 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the back Square up the unit by making sure that measurement x to x equals y to y.
Page 11
Assembly Instructions Step 16 Fit the shelf studs For each of the 2 loose shelves , insert 4 shelf studs Step 17 Fit the 2 loose shelves Lower the 2 loose shelves down onto the shelf studs Step 18 Prepare the 2 doors Push fit 2 hinges into each of the doors...
Page 12
Assembly Instructions Step 19 Fit doors and handles Note: The easiest way to attach each door is to fit the top hinge first, then align and fit the other hinge. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the slot in the hinge plate.
Page 13
Assembly Instructions Step 20 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
Page 14
Assembly Instructions Step 21 Assembly is complete If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
Need help?
Do you have a question about the 411/4909 and is the answer not in the manual?
Questions and answers