(IoT) devices with smart connection and cloud application/services. AI7697HD is a highly integrated SIP module which features an application processor, a low power 1x1 dual-band Wi-Fi subsystem, a Bluetooth subsystem, and a Power Management Unit. The application processor subsystem contains an ARM Cortex-M4F MCU, which has many peripherals, including UART, I2C, SPI, I2S, PWM, IrDA, and auxiliary ADC.
5 PMU_EN_WF GPIO6 27 4 GPIO27 GPIO7 28 3 GPIO28 GPIO5 29 2 GPIO30 GPIO24 30 1 GPIO29 31 32 34 35 36 37 39 40 Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page 3 of 12...
Page 5
Operating Block AI7697HD 2.4GHz. 5GHz Dual-Band Antenna Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page 4 of 12...
Page 6
PuTTY Program Command Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page 5 of 12...
Page 7
In general, it is WPA PSK or WPA2 PSK. If you want to use different settings, please read the table 'Table 1. Supported AuthMode(s)' at the bottom of this example. Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13...
Page 8
STA EncrypType 8 config write STA Ssid myhome config write STA SsidLen 6 config write STA WpaPsk 12345678 config write STA WpaPskLen 8 config write common OpMode 1 Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page 7 of 12...
Page 9
11 10.10.10.254 3 64 The ping stops after sending three packets to 10.10.10.254. The ping usage is: f 11 <ip address> <times> <ping packet length> Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13...
Page 10
| 9 | Support both WPA and WPA2 PSK +---+-------------------------------------+ Table 1. Supported AuthMode(s) +---+------------------------+ | 0 | WEP +---+------------------------+ | 1 | No encryption +---+------------------------+ | 4 | TKIP Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page 9 of 12...
Page 11
LinkIt 7687 HDK. This example assumes WPA2 PSK is used for authentication, AES for encryption, 'iot_ap' (length 6) for the SSID, and the password of WPA2 as '87654321' (length 8). Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13...
Page 12
- 0011, scan window (17 * 0.625 ms). Two bytes long HEX value. - 1, own address type, 1 means random address. - 0, filter policy. A similar log is written to the output: @code Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page...
Page 13
The output log indicates the connection is established with a remote device. @code [I][APP] BT_GAP_LE_CONNECT_IND Success [I][APP] connection handle=0x0200 [I][APP] role=Master [I][APP] peer address:[RANDOM] 73-2c-d4-3f-d3-b2 @endcode Product Name AI7697HD MT7697D IoT SiP Module Version Date 2017.10.13 Page 12 of 12...
Need help?
Do you have a question about the AI7697HD and is the answer not in the manual?
Questions and answers