1. Manuals
  2. Brands
  3. LG Innotek Manuals
  4. Network Hardware
  5. RNRZ-B520A
  6. Owner's manual

LG Innotek RNRZ-B520A Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
Network Video
Recorder
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
RNRZ-B510A
RNRZ-B520A
201705 (V1.0)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RNRZ-B520A and is the answer not in the manual?

Questions and answers

Summary of Contents for LG Innotek RNRZ-B520A

  • Page 1 OWNER’S MANUAL Network Video Recorder Please read this manual carefully before operating your set and retain it for future reference. MODEL RNRZ-B510A RNRZ-B520A 201705 (V1.0)

  • Page 2: Table Of Contents

    Contents Contents Operation Preview screen Preview Interface Status Descriptions for Right-click Menu of Mouse Super Taskbar Description Preview operation panel Preparation Instant Channel Adding Preview Setting Introduction Basic Configuration Features Viewport Configuration Accessories Customized Preview Front Panel Camera setup Rear Panel Channels Stream Setup Video Setup OSD setting...
  • Page 3 Contents System Setting General Setting Network Setting Disk Management Hot-spare Setting Configuration Log Management Maintenance Information Other Setting Alarm Setting Alarm Input Alarm Output Alarm Host Manual Alarm Clear Alarm User management Basic Configuration Online User Smart Configuration VCA Report Alarm Information Appendix Specifications...

  • Page 4: Preparation

    Preparation Preparation Introduction Accessories Mouse Screws Model RNRZ-B510A (10 Channel) / RNRZ-B520A (20 Channel) is used for the description, operation and details provided in this operating guide. Product Rack Mount Specification Bracket Features • Stable embedded Linux operating system. •...

  • Page 5: Front Panel

    Preparation Front Panel Power Indicator: Lights when the system is powered. HDD Indicator: Lights when the HDD is accessed. NET Indicator: Blinks when the network is connected. USB Port: Connects an external USB device for backup or playback. Rear Panel i j k AUDIO INPUT: Connect the audio output of an external device.

  • Page 6: Installation

    Installation Installation Connections Precautions • Depending on the camera and other equipment there are various ways to connect the unit. Please refer to the camera manual or manuals for other devices as necessary for additional connection information. • Be sure to switch off the camera before installation and connection. Basic Connection Overview Router Connect network cable for client control or...

  • Page 7: Connecting Display Device

    Installation Connecting Display device Connecting Audio device This unit can be output simultaneously from the HDMI and VGA jack. Connect the AUDIO OUTPUT jacks on the unit to the mono audio in The video signal connects between the system and the monitor. jacks on your audio device.

  • Page 8: Connecting Usb Device

    Installation Connecting USB device Connecting Network You can control and monitor the system via network. With the remote USB device connection control (monitoring), you can change the system configuration or monitor the image via network. After the installation, check the network settings for the remote control and monitoring work.

  • Page 9: Connecting Alarm Input And Alarm Output

    Installation Connecting Alarm Input and Alarm Output Alarm Output Connect the alarm device to the alarm output. Alarm signal outputs Alarm terminals are used to connect the alarm devices such as when an event occur. sensors, door switches, etc. Alarm output connection Alarm Input You can connect up to 16 alarm sensors.

  • Page 10: Hdd Installation

    Installation HDD INSTALLATION Detach the top case by sliding it after removing the screws. You must lift up the top case verticality. Note for Hard Disk Drive The internal hard disk drive (HDD) is a fragile piece of equipment. Please follow the guidelines below when using the system to protect ALM OUT against possible HDD failure.

  • Page 11: Replacing The Hard Disk Drive

    Installation Startup Replacing the Hard Disk Drive Before replacing the HDD, turn the power of the unit off and detach the power plug from the outlet. 1. Follow steps 1 to 2 described in “Installing Hard Disk Drive” . After the power is plugged in and the power switch on the rear panel is turned on, the device will start with beep sound.

  • Page 12: Startup Guide

    Installation Startup Guide 4. Enter the time & time zone setting and click [Apply] to set the time zone and time. Click [Next] to enter the next step. After the device is started, the simple configuration can be conducted for the device through the startup guide to ensure the normal operation of device.
  • Page 13 Installation 7. The system searches the available IP cameras on the network and display on the list automatically. Select [Refresh] to search cameras again. There is a check box on each camera on the list. Select check boxes on each camera and select [Next] to finish settings. Click [Next] to enter the next step.

  • Page 14: Operation

    Operation Operation Preview screen Description for right-click menu item Name Description Main menu Enter the main menu of system. Preview Interface Status Preview settings Enter the preview settings interface. Directly apply the specific number of screens In the preview screen, the recording and alarm status of each channel Customized and scene settings set by users previously.

  • Page 15: Super Taskbar Description

    Operation Super Taskbar Description Preview operation panel By moving the mouse cursor to the right side of screen, the super 1. In the login status, click a channel in the preview screen to show taskbar appears. Every items in the main menu can be selected on the preview operation panel as shown in the figure below.

  • Page 16: Instant Channel Adding

    Operation Instant Channel Adding Manual snapshot Click to take a snaphot of current preview screen. You can add an IP camera to a channel instantly. The preview status will be as shown in the figure below if no channel is added to the channel.

  • Page 17: Preview Setting

    Operation Preview Setting Viewport Configuration You can set preview screen configuration and channel positioning on this menu. Select [Preview Setting] through the right mouse click on the preview screen to enter the [Preview Setting] menu as shown in the figure below.

  • Page 18: Camera Setup

    Operation Camera setup 3. Click [Advanced] to search in different connection modes. Channels General Channel Adding 1. Select [Main Menu] > [Cameras] > [Channels] > [Basic Configuration] to enter the channel configuration screen as shown in the figure below. 4. Select one or more devices in the search list and click [Add] to add to the idle channel.
  • Page 19 Operation Importing device configuration NOTE 1. Select a device to be operated in the list. 2. After clicking [Import] and then click [Confirm] in the pop-up • If the device to be added is a multi-channel system, users can screen. The [Configuration Import] screen select the channel No.

  • Page 20: Stream Setup

    Operation Stream Setup • Input volume It refers to the input volume of corresponding channel and the Select [Main Menu] > [Cameras] > [Stream Setup] to enter the range is from 0 to 100. stream setup screen as shown in the figure below. Substream can be set separately.

  • Page 21: Video Setup

    Operation Video Setup In order to obtain good visual effects, users can adjust the settings of video. After these settings are adjusted, they will affect the local preview, recording, network preview and other items. Select [Main Menu] > [Cameras] > [Video Setting] to enter the video setup screen as shown in the figure below.

  • Page 22: Motion

    Operation Motion Video mask The video mask function can cover some key areas on the video. 1. Select [Main Menu] > [Cameras] > [Motion] to enter the motion detection setup screen as shown in the figure below. 1. Select a channel which needs video mask setting. 2.

  • Page 23: Alarm Input

    Operation Alarm Input Video Loss By setting the alarm input, the system can be linked for prompting and Set the video loss alarm and link the system for prompting and recording when the alarm input alarm situation occurs in the front- recording when the video loss occurs in the channel.

  • Page 24: Ptz Control

    Operation PTZ Control Preset control 1. Select a preset number in the pull down list of [Presets] option. 2. After controlling the PTZ action, click [Set] on the [Presets] option to save the camera position. PTZ Control Operation 3. Repeat seep 1 to 2 to set several presets. 4.

  • Page 25: Recording

    Operation Recording Port alarm recording setting guide 1. Select [Main Menu] > [Record Guide] > [Port Alarm] to enter the [Port Alarm Setup] screen as shown in the figure below. Record Guide Enter the main menu and click [Recording Guide] to configure the schedule recording, motion detection recording, port alarm recording and VCA recording conveniently.

  • Page 26: Recording Setting

    Operation Recording Setting Advanced Setting 1. Select [Main Menu] > [Recording Setting] > [Recording] > [Advanced] to enter the advanced setting screen of recording as Basic setting shown in the figure below. 1. Select [Main Menu] > [Recording Setting] > [Recording] > [Basic] to enter the basic setting screen of recording as shown in the figure below.

  • Page 27: Parameter

    Operation Diskgroup allocation 3 Check [Enable Holiday Plan] and set the [Mode], [Start Date] and [End Date] options. 1. Select [Main Menu] > [Recording Setting] > [Diskgroup Allocation] 4. Click [Confirm] to save the setting. After the holiday plan to enter the [Diskgroup Allocation] screen as shown in the figure is enabled, the [Holiday] option can be selected in [Date] of below.

  • Page 28: Snapshot Setup

    Operation Rebuild Index Quota configuration When an exception of hard disk occus or video is lost, the lost records can be found by rebuilding the index. 1. Select [Main Menu] > [Recording Setting] > [Rebuild Index] to enter the [Rebuild Index] screen as shown in the figure below. 1.

  • Page 29: Playback

    Operation Playback Description of playback control bar Button Description Button Description Mute off / Snapshot Mute on Playback screen description Start/end Save editing editing Introduce the composition of playback screen and various functions. Enter the main menu and click [Video Playback] to enter the playback Add default Digital Zoom screen as shown in the figure below.

  • Page 30: Optional Playback Operation

    Operation Optional playback operation Adding a tag In the playback screen, click to add the default tag or click input the tag name and add the customized tag. Single-frame playback When the video is playback, view the detail changes of screen by Managing tags single-frame playback.

  • Page 31: Normal Playback

    Operation Normal Playback Tag Playback Search and play the recording files according to the selected channel The video tag function can help users record the relevant personnel or and date. site information at a certain time point during playing back the video 1.

  • Page 32: Smart Playback

    Operation Smart Playback Face Detection 1. Click to enter the [Face detection] mode screen. Smart playback means that the VCA operation is conducted for the recording files. Four kinds of VCA operations are supported currently. 2. Click the button to start search. In the search process, the words of “VCA SEARCHING……”...

  • Page 33: Picture Playback

    Operation Picture playback Playback by Log Play the pictures of selected channel in [Picture] mode as shown in Play the recording files corresponding to log information. the figure below. 1. Select [Main Menu] > [System Setting] > [Log Management] to enter the log management screen as shown in the figure below.

  • Page 34: Backup

    Operation Backup 7. Select [Target] and [File Format] options and click [Apply] to start backup. The recording files in the system can be backed up to other disk or USB storage devices. General Backup 1. Select [Main Menu] >[Backup] to enter the backup screen as shown in the figure below.

  • Page 35: General Setting

    Operation System Setting Network Setting NIC 1 1. Select [Main Menu] > [System Setting] > [Network Setting] > [NIC1] to enter the NIC1 setting screen as shown in the figure below. General Setting Select [Main Menu] > [System Setting] > [General Setting] to enter the general setting screen as shown in the figure below.
  • Page 36 Operation Permission 1. Select [Main Menu] > [System Setting] > [Network Setting] > 1. Select [Main Menu] > [System Setting] > [Network Setting] [Permission] to enter the IP permission setting screen as shown in > [FTP] to enter the FTP setting screen as shown in the figure the figure below.

  • Page 37: Disk Management

    Operation Disk Management 4. Set whether to detect all the disks after rebooting and whether to repair the damaged disks. Basic configuration 1. Select [Main Menu] > [System Setting] > [Disk Management] > [Basic Configuration] to enter the basic disk donfiguration screen as shown in the figure below.

  • Page 38: Hot-Spare Setting

    Operation Hot-spare Setting NFS setting 1. Select [Main Menu] > [System Setting] > [Disk Management] Enable the hot-spare system when a failure happens on a device in the > [NFS Setup] to enter the NFS setting screen as shown in the hot-spare system, the system will automatically switches to the hot- figure below.

  • Page 39: Configuration

    Operation Configuration 5. Select [Main Menu] > [System Setting] > [Hot-spare Setting] to enter the Hot-spare setting screen. Reset to default 1. Select [Main Menu] > [System Setting] > [Configuration] > [Reset to default] to enter the default resetting screen as shown in the figure below. 6.

  • Page 40: Log Management

    Operation Log Management System upgrade 1. Select [Main Menu] > [System Setting] > [Maintenance ] > 1. Select [Main Menu] > [System Setting] > [Log Management] to [System Upgrade] to enter the system upgrade screen as shown enter the log management screen as shown in the figure below. in the figure below.

  • Page 41: Information

    Operation Information Protocol management Select [Main Menu] > [System Setting] > [Other Setting] > [Protocol Management] to enter the protocol management setting screen as System Information shown in the figure below. The set device has protocols and addible Select [Main Menu] > [System Setting] > [Information] > [System protocols.

  • Page 42: Alarm Setting

    Operation Alarm Setting Alarm Output 1. Select [Main Menu] > [Alarm Setting] > [Alarm Output] to enter the alarm output setting screen as shown in the figure below. Alarm Input The recording can be conducted when an alarm occurs on the local system and the alarm situation needs to be input through the alarm input setting.

  • Page 43: Alarm Host

    Operation Alarm Host Manual Alarm Alarm host is added to expand the alarm input and output ports of 1. Select [Main Menu] > [Alarm Setting] > [Manual Alarm] to enter device on the basis of local alarm input and output ports of device. If the manual alarm setting screen as shown in the figure below.

  • Page 44: User Management

    Operation User management User permission management 1. Click the in the user list to display the user permission editing window as shown in the figure below: Basic Configuration Adding a user 1. Select [Main Menu] > [Users] > [Basic Configuration] to enter the user management setting screen as shown in the figure below.

  • Page 45: Online User

    Operation Online User Select [Main Menu] > [Users] > [Online User] to enter the online user screen as shown in the figure below. You can check the connected users on the list. Click [Refresh] to update the user list and click [Disconnected] to force disconnect a specific user.

  • Page 46: Vca

    Operation Event Parameter 1. Select [Main Menu] > [VCA] > [Smart configuration] > [Event Parameter] to enter the [Event Parameter] setting screen as shown in the figure below. Smart Configuration Enable Arithmatic 1. Select [Main Menu] > [VCA] > [Smart configuration] > [Enable Arithmatic] to enter the arithmetic enabling screen as shown in the figure below.

  • Page 47: Vca Report

    Operation Alarm Information Alarm Setting 1. Select [Main Menu] > [VCA] > [Smart configuration] > [Alarm Select [Main Menu] > [VCA] > [Alarm Information] to display the real- Setting] to enter the [Alarm Setting] screen as shown in the time alarm information as shown in the figure below. figure below.

  • Page 48: Appendix

    Appendix Appendix Specifications Item RNRZ-B510A IP Camera Input 10 channels QCIF, CIF, 2CIF, DCIF, 4CIF, VGA, 720P (1280 x 720), UXGA, Video Resolution 1080P (1920 x 1080), 3MP (2048 x 1536), 4MP (2560 x 1440), 5MP (2560 x 1920), 6MP (2752 x 2208), 4K (3840 x 2160) Video Compression H.264, H.265 Local Display...
  • Page 49 Appendix Item RNRZ-B520A IP Camera Input 20 channels QCIF, CIF, 2CIF, DCIF, 4CIF, VGA, 720P (1280 x 720), UXGA, Video Resolution 1080P (1920 x 1080), 3MP (2048 x 1536), 4MP (2560 x 1440), 5MP (2560 x 1920), 6MP (2752 x 2208), 4K (3840 x 2160) Video Compression H.264, H.265...

This manual is also suitable for:

Rnrz-b510a

Table of Contents