Setting; Setting Menu - Sanyo PLC-SW15 Owner's Manual

SETTING

Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
SETTING
box SETTING Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the item that you want to set, and
then press the SELECT button to set it "On" or "Off" or press the
POINT LEFT/RIGHT button to adjust the value.
Volume
Press POINT LEFT button to decrease volume, and press POINT
RIGHT button to increase the volume. (From 0 to 63.)
The sound volume can be also adjusted by pressing the VOLUME
(+/–) button on the remote control unit. (Refer to page 21)
Mute
Set "On" to mute the sound. To restore the sound, set "Off" or press
the MUTE button or the VOLUME (+/–) button on the remote control
unit.
The mute can be also set by pressing the MUTE button on the
remote control unit. (Refer to page 21)
Blue back
When this function is "On," this projector will produce a blue image
instead of the video noise on the screen when the input source is
unplugged or turned off.
Display
This function decides whether to display the On-Screen Displays
(except ON-SCREEN MENU).
Set "On1" to show all the On-Screen Displays.
Set "On2" to show the On-Screen Displays except the Preparation
Display (Our Logo).
Set "Off" to set the On-Screen Displays below disappeared.
Preparation Display (Our Logo and the Number-counting-
down Display)
Mode Display (Computer / Video)
Volume/Mute Displays
Normal Display
No show Display
Keystone Display
True Display
D.Zoom Display
Ceiling
When this function is "On," the top / bottom and the left / right
reversed picture is provided to project the image from a ceiling
mounted projector.
Rear
When this function is "On," the left / right reversed picture is provided
to project the image to a rear projection screen.
32

SETTING MENU

and press the SELECT button. Another dialog
Move the arrow to the
item and then press
the SELECT button.
Closes the Setting Menu.
Ceiling function
Rear function
Indicates the level
of the volume.
Press the POINT
RIGHT / LEFT button
to adjust the volume.