Camera Setup - WingScapes TimelapseCam Pro User Manual

Camera Setup

Battery lnstallation
Make sure the Power switch is in the OFF position. Open the camera cover. Press the Battery
Chamber Release button. Install 6 C-Cell Alkaline batteries. Make sure that the (+ and -)
polarities match the polarities indicated inside the battery chamber holder. Reinsert the
Battery Chamber into the camera until you hear an audible click.
Note: Anytime you load or unload batteries, make sure that the camera is OFF.
Warning: If using 12V DC Camera Power Adapter, do not remove internal batteries.
DO NOT use lithium batteries.
Insert SD Card
Camera needs to be powered off when installing and
removing SD card. You will need to open the front cover
to insert an SD memory card. You can insert an SD Card
up to 32 GB. Insert the SD Card in the direction indicated
on the card, until you hear an audible click.
Note: Camera will not operate without an SD memory
card installed.
Power ON
Slide the Power Switch to the ON position. The display will show the current mode
selected by the Switch. Choose the mode by sliding the Switch between the options
(OFF, SETUP/PLAYBACK, ON) to make changes to settings or operate the camera in the
different modes.
Page 10
TimelapseCam Pro User Guide
2.14 CAMERA NAME - Use this option to set a name
for your camera.
2.15 IMPRINT INFO - Selection option to imprint info
on strip on bottom of images, such as Time, Date and
Camera Name
2.16 VIDEO LENGTH - Select length of video desired.
2.17 VIDEO SOUND - Select whether or not to record
sound for videos.
2.18 VIDEO QUALITY - Select resolution desired for
videos.
TimelapseCam Pro User Guide
CAMERA NAME
T I M E L A P S E C A M
IMPRINT INFO?
X YES
NO
VIDEO LENGTH
90 SECONDS
60 SECONDS
30 SECONDS
X 10 SECONDS
5 seconds
VIDEO SOUND
X ON
OFF
VIDEO QUALITY
X HD (1280 x 720)
VGA (640 x 480)
Page 15